메뉴

경상대학교 복합재구조 실험실 메뉴

경상대학교 복합재구조 실험실

닫기

Publications

International Journal

Upadted - 2020.08.07

(*Corresponding author.)

In 2020

  • 1. Choi W-H, Kwak B-S, Nam Y-W*. Radar absorbing serrated edge for broadband radar cross-section reduction.

    Microwave And Optical Technology Letters

    2020;62:1112-1116.
  • 2. Choe H-S, Kwak B-S, Park S-M, Truong V-H,Nam Y-W*, Kweon J-H*. Tensile strength of composites bonded scarf joint in various thermal environmental conditions.

    Advanced Composite Materials

    2020;29(3):285-300.
  • 3. Choi W-H, Kwak B-S,Nam Y-W*, Kweon J-H*. Microwave Absorbing Structure Using Periodic Pattern Coated Fabric.

    Composite Structures

    2020;238:111953.
  • 4. Choi W-H, Kwak B-S, Noh Y-H, Yook J-G, Nam Y-W*, Kweon J-H*. Radar-absorbing nickel-coated fabric composite for wing-shaped structure in the
    X-band.

    Composite Structures

    2020;239:111885.
  • 5. An W-J, Park G-Y, Choi J-H*. Process variables of I-fiber stitching in Mode I failure.

    Composite Structures

    2020;240:112082.
  • 6. Kwak B-S, Choi W-H, Noh Y-H, Jeong G-W, Yook J-G, Kweon J-H*, Nam Y-W*. Nickel-coated glass/epoxy honeycomb sandwich composite for broadband RCS reduction.

    Composites Part B: Engineering

    2020;191:107952.
  • 7. Choi W-H, Kwak B-S, Nam Y-W*. Radar-absorbing foam-based sandwich composite with electroless nickel–plated glass fabric.

    Composite Structures

    2020;243:112252.
  • 8. Park S-M, Rene Roy, Kweon J-H*, Nam Y-W*. Strength and failure modes of surface treated CFRP secondary bonded single-lap joints in static and fatigue tensile loading regimes.

    Composites Part A: Applied Science and Manufacturing

    2020;134:105897.
  • 9. Jang M-S, Choi J-H, Jang W-H, Nam Y-W, Kim C-G*. Influence of lightning strikes on the structural performance of Ni-glass/epoxy radar-absorbing structures.

    Composite Structures

    2020;245:112301.
  • 10. Hoang V-T, Kwon B-S, Choe H-S, Kweon J-H, Nam Y-W*. Postprocessing-method-induced mechanical properties of carbonfiber-reinforced thermoplastic composites.

    Journal of Thermoplastic Composite Materials

    2020 Accepted.
  • 11. Hoang V-T, Pham T-N, Yum Y-J. Mechanical properties of coconut trunk particle/polyester composite based on alkali treatment.


    Advanced Composites Letters

    2020;29:2633366X20935891.
  • 12. Choi W-H, Choe H-S, Nam Y-W*. Multifunctional microwave heating and absorbing honeycomb core using nickel-coated glass fabric.


    Composites Part A: Applied Science and Manufacturing

    2020 Accepted.

In 2019

  • 1. Kim C-H, Sim H-W, An W-J, Kweon J-H*, Choi J-H*. Impact characteristics of composite panel stitched by I-fber process.

    Composites Part A:Applied Science and Manufacturing

    2019;127:105644.
  • 2. Kang G-S, Kwak B-S, Choe H-S, Kweon J-H*. Parametric study on the buckling load after micro-bolt repair of a composite laminate with delamination.

    Composite Structures

    2019;215:1-12.
  • 3. Truong V-H, Kwak B-S, Rene Roy, Kweon J-H*. Cohesive zone method for failure analysis of scarf patch-repaired composite laminates under bending load.

    Composite Structures

    2019;222:110895.
  • 4. Kwak B-S, Lee G-E, Kang G-S, Kweon J-H*. An Investigation of repair methods for delaminated composite laminate under flexural load.


    Composite Structures

    2019;215:249-257.
  • 5. Jonathan Tapullima, Kim C-H, Choi J-H*. Analysis and experiment on DCB specimen using I-fiber stitching process.

    Composite Structures

    2019;220:521-528.
  • 6. So Jung Baek, Man Sung Kim, Woo Jin An, Choi J-H*. Defect detection of composite adhesive joints using electrical resistance method.


    Composite Structures

    2019;220:179-184.
  • 7. An W-J, Kim C-H, Choi J-H*, Kweon J-H*. Static strength of RTM composite joint by I-Fiber stitching method.

    Composite Structures

    2019;210:348-353.
  • 8. An W-J, Kim C-H, Kim T-H, Choi J-H*. Study on strength and defect detection capability of bonded joints according to CNT content.


    Composite Structures

    2019;207:204-212.

In 2018

  • 1. Park S-S, Choe H-S, Kwak B-S, Choi J-H*, Kweon J-H*. Micro-bolt repair for delaminated composite plate under compression.

    Composite Structures

    2019;192:245-254.
  • 2. Truong V-H, Nguyen K-H, Park S-S ,Kweon J-H*. Failure load analysis of C-shaped composite beam susing a cohesive zone model.

    Composite Structures

    2018;184:581-590.
  • 3. Nguyen K-H, Ju H-W. Truong V-H, Kweon J-H*. Delamination analysis of multi-angle composite curved beams using an out-of-autoclave material.

    Composite Structures

    2018;183:320-330.
  • 4. Nam Y-W, Sarath Kumar Sathish Kumar, Venkat Akhil Ankem, Kim C-G*. Multi-functional aramid/epoxy composite for stealth space hypervelocity impact shielding system.

    Composite Structures

    2018;193:113-120.
  • 5. Choi J-H, Nam Y-W, Jang M-S, Kim C-G*. Characteristics of silicon carbide fiber-reinforced composite for microwave absorbing structures.


    Composite Structures

    2018;202:290-295.
  • 6. Ankita Hazarika, Biplab Deka, Kong K-Y, Kim Y-D, Nam Y-W, Choi J-H, Kim C-G, Park Y-B*. Microwave absorption and mechanical performance of
    α-MnO 2 nanostructures grown on woven Kevlar fiber/reduced graphene oxide-polyaniline nanofiber array-reinforced polyester resin composites.

    Composites Part B: Engineering

    2018;140:123-132.
  • 7. Nam Y-W, Shin J-H, Choi J-H, Lee W-J, Kwon H-S, Shin J-S, Kim C-G*. Micro-mechanical failure prediction of radar-absorbing structure dispersed with multi-walled carbon nanotubes considering multi-scale modeling.

    Journal of Composite Materials

    2018;52(12):1649-1660.
  • 8. Nam Y-W, Choi J-H, Huh J-M, Lee W-J, Kim C-G*. Thin broadband microwave absorber with conductive and magnetic materials coated on a glass fabric.

    Journal of Composite Materials

    2018;52(10):1413-1420.

In 2017

  • 1. Ju H-W, Nguyen K-H, Chae S-S, Kweon J-H*. Delamination strength of composite curved beams reinforced by grooved stainless-steel Z-pins.


    Composite Structures

    2017;180:497-506.
  • 2. Kim C-H, Jo D-H, Choi J-H*. Failure strength of composite T-joints prepared using a new 1-thread stitching process.

    Composite Structures

    2017;178:225-231.
  • 3. Kim C-H, Choi J-H*. Effects of dispersion methods and surface treatment of carbon nanotubes on defect detectability and static strengths of adhesive joints.

    Composite Structures

    2017;176:684-691.
  • 4. Nguyen K-H, Ju H-W. Truong V-H, Kweon J-H*. Delamination analysis of multi-angle composite curved beams using an out-of-autoclave material.

    Composite Structures

    2017;183:320-330.
  • 5. Truong V-H, Yoo J-S, Kim C-H, Park M-Y, Choi J-H*, Kweon J-H*. Failure load prediction of laminates repaired with a scarf-bonded patch using the damage zone method.

    Advanced Composite Materials

    2017;26:115-133.
  • 6. Nam Y-W, Choi J-H, Jang M-S, Lee W-J, Kim C-G*. Radar-absorbing structure with nickel-coated glass fabric and its application to a wing airfoil model.

    Composite Structures

    2017;180:507-512.
  • 7. Nam Y-W, Choi J-H, Lee W-J, Kim C-G*. Thin and lightweight radar-absorbing structure containing glass fabric coated with silver by sputtering.

    Composite Structures

    2017;160:1171-1177.
  • 8. Nam Y-W, Choi J-H, Lee W-J, Kim C-G*. Fabrication of a thin and lightweight microwave absorber containing Ni-coated glass fibers by electroless plating.

    Composites Science and Technology

    2017;145:165-172.

In 2016

  • 1. Kim J-H, Nguyen K-H, Choi J-H*, Kweon J-H*. Experimental and finite element analysis of curved composite structures with C-section.


    Composite Structures

    2016;140:106-117.
  • 2. Yoo J-S. Truong V-H, Park M-Y, Choi J-H*, Kweon J-H*. Parametric study on static and fatigue strength recovery of scarf-patch-repaired composite laminates.

    Composite Structures

    2016;140:407-432.
  • 3. Yoo S-Y, Kim C-H, Choi J-H*, Kweon J-H*. The structural analysis and strength evaluation of the rivet nut joint for composite repair.


    Composite Structures

    2016;136:662-668.
  • 4. Deepak Kumar, Rene Roy, Kweon J-H*, Choi J-H*. Numerical Modeling of Combined Matrix Cracking and Delamination in Composite Laminates Using Cohesive Elements.

    Applied Composite Materials

    2016;23:397-419.
  • 5. Nam Y-W, Seong T-H, Ahn J-M*. Adjusted Instantaneous Impact Point and New Flight Safety Decision Rule.

    Journal of Spacecraft and Rockets

    2016;53(4):766-773.

In 2015

  • 1. Ahn D-K, Choi J-H*, Kweon J-H*. Relationship between the drilling condition and the damage (delamination) zone of glass-fiber-reinforced plastic composites.

    Advanced Composite Materials

    2015;24:297-305.
  • 2. Kim C-H, Choi J-H*, Kweon J-H*. Defect detection in adhesive joints using the impedance method.

    Composite Structures

    2015;120:183-188.
  • 3. Ko M-G, Kweon J-H*, Choi J-H*. Fatigue characteristics of jagged pin-reinforced composite single-lap joints in hygrothermal environments.


    Composite Structures

    2015;119:59-66.

In 2014

  • 1. R. Roy, Park S-J, J.H. Kweon*, J.H Choi*. Characterization of Nomex honeycomb core constituent material mechanical properties.

    Composite Structures

    2014;117:255-266.
  • 2. Jeong K-W, Park Y-B, Choi J-H*, Kweon J-H*. A study on the failure mode and load of the composite key joint.

    Journal of Composite Materials

    2014;48:1417-1427.
  • 3. Park Y-B, Kweon J-H*, Choi J-H*. Failure characteristics of carbon/BMI-Nomex sandwich joints in various hygrothermal conditions.


    Composites Part B: Engineering 2014;60:213-221.

  • 4. Deepak Kumar, Ko M-G, Rene Roy, Kweon J-H*, Choi J-H*, Soon-Kwan Jeong, Jin-Woo Jeon, Jun-Su Han. AFP mandrel development for composite aircraft fuselage skin.

    International Journal of Aeronautical and Space Sciences

    2014;15:32-43.
  • 5. Yun J-H, Choi J-H*, Kweon J-H*. A study on the strength improvemen to the multi-bolted Joint.

    Composite Structures

    2014;108:409-416.
  • 6. Kang M-H, Choi J-H*, Kweon J-H*. Fatigue life evaluation and crackd detection of the adhesive joint with carbon nanotubes.

    Composite Structures

    2014;108:417-422.
  • 7. Ji H, Kweon J-H*, Choi J-H*. Fatigue characteristics of stainless steel pin-reinforced composite hat joints.

    Composite Structures

    2014;108:19-56.
  • 8. Son H-G, Park Y-B, Kweon J-H*, Choi J-H*. Fatigue behaviour of metal pin-reinforced composite single-lap joints in a hygrothermal environment.

    Composite Structures

    2014;108:151-160.
  • 9. R. Roy, K.H. Nguyen, Park Y-B, Kweon J-H*, Choi J-H*. Testing and Modeling of NomexTM Honeycomb Sandwich Panels with Bolt Insert.


    Composites Part B: Engineering

    2014;56:762-769.
  • 10. R. Roy, Kweon J-H*, Choi J-H*. Meso-scale finite element modeling of NomexTM honeycomb cores.

    Journal of Composite Materials

    2014;23:17-29.

In 2013

  • 1. Jeong M-G, Kweon J-H*, Choi J-H*, Choi I-H. Effect of various hygrothermal environments on the failure of adhesively bonded composite single-lap joints.

    Journal of Composite Materials

    2013;47:2061-2073.
  • 2. Lee G-C, Kweon J-H*, Choi J-H*. Optimization of composite sandwich cylinders for underwater vehicle application.

    Composite Structures


    2013;96:691-697.

In 2012

  • 1. Lee B-H, Jeong M-G, Yun S-U, Kweon J-H*, Choi J-H*. Effect of Manufacturing Environments on the Shear Properties of Glass/Epoxy Composite Laminate.

    Advanced Science Letters

    2012;15:351-353.
  • 2. Park Y-B, Kweon J-H*, Choi J-H*. An Experimental Study on the Strength of Aluminum Honeycomb Sandwich Joints Under Pull-Out Loading.


    Advanced Science Letters

    . 2012;94:321-325.
  • 3. Yun S-U, Jeong M-G, Park Y-B, Kweon J-H*, Choi J-H*. Tensile Strength of Composite Laminates After Various Types of Repair.


    Advanced Science Letters

    2012;15:306-309.
  • 4. Lee G-C, Kim J-S, Kweon J-H*, Choi J-H*. Optimal Design of Composite Stiffened Cylinder Subject to External Hydrostatic Pressure.


    Advanced Science Letters

    2012;15:297-300.
  • 5. Ahn D-K, Kweon J-H*, Choi J-H*, Shul C-W. Characterization of Surface Roughness and Analysis of Process Value in Stereolithography.


    Advanced Science Letters

    2012;15:262-266.
  • 6. Rene Roy, Nguyen K-H, Kweon J-H*, Shul C-W. Finite Element Modeling of Nomex® Honeycomb Core Carbon/Epoxy Composite Sandwich panel.

    Advanced Science Letters

    2012;5:257-261.
  • 7. Nguyen N-T, K.H. Nguyen, C. Licht, Park Y-B, Kweon J-H*, Choi J-H*. Characterization of Composite Material Properties using Eigenstrain Method.

    Journal of Composite Materials

    2012;20:299-313.
  • 8. Nguyen K-H, Park Y-B, Kweon J-H*, Choi J-H*, Shul C-W, Yang M-S, Jun S-M. Experimental and numerical study on the failure of sandwich T-joints under pull-off loading.

    International Journal of Aeronautical and Space Science

    2012;13:229-237.
  • 9. Ahn D-K, Kweon J-H*, Choi J-H*, Lee S-H. Quantification of surface roughness of parts processed by laminated object manufacturing.


    Materials Processing

    Technology 2012;212:339-346.
  • 10. Nguyen K-H, Park Y-B, Kweon J-H*, Choi J-H*. Failure behaviour of foam-based sandwich joints under pull-out testing.

    Composite Structures

    2012;94:617-624
  • 11. Park Y-B, Lee B-H, Kweon J-H*, Choi J-H*, Choi I-H. The strength of composite bonded T-joints transversely reinforced by carbon pins.


    Composite Structures

    2012;94:625-634.

In 2011

  • 1. Ahn D-K, Kweon J-H*, Choi J-H*, Lee S-H. Relation between surface roughness and overlap interval in fused deposition modeling.

    Advanced Materials Research

    2011;264-265:1625-1630.
  • 2. Nguyen N-T, Kweon J-H*, Yoon K-J. Design analysis of a 3-3 mode piezocomposite actuator.

    Journal of Composite Materials

    2011,20:301-317.
  • 3. Park Y-B, Nguyen K-H, Kweon J-H*, Choi J-H*, Han J-S. Structural analysis of a composite target-drone.

    International Journal of Aeronautical and Space Science

    2011;12:84-91.

In 2010

  • 1. Kim M-H, Cho J-R, Bae W-B, Kweon J-H*, Choi J-H*, Cho S-R, Cho Y-S. Buckling Analysis of Filament-Wound Thick Composite Cylinder under Hydrostatic Pressure.

    Precision Engineering and Manufacturing

    2010;11:909-913.
  • 2. Lee Y-H, Lim D-W, Choi J-H*, Kweon J-H*, Yoon M-K. Failure load evaluation and prediction of hybrid composite double lap joints.


    Composite Structures

    2010;92:2916-2926.
  • 3. Ahn J-H, Nguyen K-H, Park Y-B, Kweon J-H*, Choi J-H*. A numerical study of the high-velocity impact response of a composite laminate using
    LS-DYNA.

    International Journal of Aeronautical and Space Science

    2010;11:221-226.
  • 4. Nguyen K-H, Ahn J-H, Kweon J-H*, Jin -Ho Choi*. Optimization of Composite Laminates Subjected to High Velocity Impact Using a Genetic Algorithm.

    International Journal of Aeronautical and Space Science

    2010;11:227-233.
  • 5. Moon C-J, Kim I-H, Choi B-H, Kweon J-H*, Choi J-H*. Buckling of filament wound composite cylinders subjected to hydrostatic pressure for underwater vehicle applications.

    Composite Structures

    2010;92:2241-2251.
  • 6. Song M-G, Kweon J-H*, Choi J-H*, Song M-H, Shin S-J, Lee T-J. Effect of manufacturing methods on the shear strength of composite single-lap bonded joints.

    Composite Structures

    2010;92:2194-2202.
  • 7. Park Y-B, Song M-G, Kim J-J, Kweon J-H*, Choi J-H*. Strength of carbon/epoxy composite single-lap bonded joints in various environmental conditions.

    Composite Structures

    2010;92:2173-2180.
  • 8. Kim G-H, Choi J-H*, Kweon J-H*. Manufacture and performance evaluation of the composite hat-stiffened panel.

    Composite Structures

    2010;92:2276-2284.
  • 9. Park J-H, Choi J-H*, Kweon J-H*. Evaluating the strengths of thick aluminum-to-aluminum joints with different adhesive lengths and thicknesses.

    Composite Structures

    2010;92:2226-2235.
  • 10.Park K-W, Yoon M-K, Lee S-B, Choi J-H*, Mano Thubrikar. Effects of electrode degradation and solvent evaporation on the performance of
    ionic-polymer-metal-composite sensors.

    Smart Materials & Structures

    2010;19:075002.

In 2009

  • 1. Nguyen K-H, Kweon J-H*, Choi J-H*. Failure load prediction by damage zone method for single-lap bonded joints of carbon composite and aluminum.

    Journal of Composite Materials

    2009;43:3031-3056.
  • 2. Ahn D-K, Kweon J-H*, Kwon S-M, Song J-I, Lee S-H. Representation of surface roughness in fused deposition modeling.

    Materials Processing Technology

    2009;209:5593-5600.
  • 3. Choi J-H*, Ban C-S, Kweon J-H*. A study on crack propagation of composite materials using a planar piezo sensor.

    Journal of Reinforced Plastic and Composites

    2009;28:869-879.

In 2008

  • 1. Seong M-S, Kim T-H, Nguyen K-H, Kweon J-H*, Choi J-H*. A Parametric Study on the Failure of Bonded Single-Lap Joints of Carbon Composite and Aluminum.

    Composite Structures

    2008;86:135-145.
  • 2. Hur S-H, Son H-J, Kweon J-H*, Choi J-H*. Postbuckling of Composite Cylinders under External Hydrostatic Pressure.

    Composite Structures

    2008;86:114-124.
  • 3. Song K-I, Choi J-Y, Kweon J-H*, Choi J-H*, Kim K-S. An Experimental Study of the Insert Joint Strength of Composite Sandwich Structures.


    Composite Structures

    2008;86:107-113.
  • 4. Song M-H, Kweon J-H*, Kim S-K, Kim C, Lee T-J, Choi S-M, Seong M-S. An experimental study on the failure of carbon/epoxy single lap riveted joints after thermal exposure.

    Composite Structures

    2008;86:125-134.
  • 5. Lim D-W, Kim T-H, Choi J-H*, Kweon J-H*, Park H-S. A Study on the Strength of Carbon-Carbon Brake Disk for Automotive Applications.


    Composite Structures

    2008;86:101-106.
  • 6. Ban C-S, Lee Y-H, Choi J-H*, Kweon J-H*. Strength Prediction of the Adhesive Joint using the Modified Damage Zone Theory.

    Composite Structures

    2008;86:98-100.
  • 7. Huh S-C, Shim J-J, Choi J-H*, Kweon J-H*. The Study on Fatigue Lifetime Evaluation on the Interconnect of Diaphragm Type Pressure Sensor According to Various Materials.

    Journal of Computational and Theoretical Nanoscience

    2008;5:1763-1767.
  • 8. Choi J-H*, Ban C-S, Kweon J-H*. Failure load prediction of a mechanically fastened composite joint subjected to a clamping force.


    Journal of Composite Materials

    2008;42:1415-1429.
  • 9. Kim T-H, Kweon J-H*, Choi J-H*. An Experimental Study on the Effect of Overlap Length on the Failure of Composite-to-Aluminum Single-Lap Bonded Joints.

    Journal of Reinforced Plastic and Composites

    2008;27:1071-1081.

In 2007

  • 1. Kweon J-H*, Shin S-Y, Choi J-H*. A Two-Dimensional Progressive Failure Analysis of Pinned Joints in Unidirectional-Fabric Laminated Composites.

    Composite Structures

    2007;41:2083-2104.
  • 2. Ryu C-O, Choi J-H*, Kweon J-H*. Failure Load Prediction of Composite Joints Using using Linear Analysis.

    Composite Structures

    2007;41:865-878.
  • 3. Kweon J-H*, Son H-J, Choi J-Y, Shin S-Y, Choi J-H*, Lee G-M. Progressive Failure Analysis of Unidirectional-Fabric Laminated Composite Joints Under Pin-Loading.

    Key Engineering Materials

    2007;334-335:1-4.
  • 4. Kim D-H, Oh S-W, I.Lee, Kweon J-H*, Choi J-H*. Weight optimization of composite flate and curved wings satisfying both flutter and divergence constraints.

    Key Engineering Materials

    2007;334-335:477-480.

In 2006

  • 1. Kweon J-H*, Jung J-W, Kim T-H, Choi J-H*, Kim D-H. Failure of Carbon Composite-to-Aluminum Joints with Combined Mechanical Fastening and Adhesive Bonding.

    Composite Structures

    2006;75:192-198.
  • 2. Yu Y-H, Choi J-H*, Kweon J-H*, Kim D-H. A Study on the Failure Detection of Composite Materials Using an Acoustic Emission.

    Composite Structures

    2006;75:163-169.
  • 3. Kweon J-H*, Choi S-M, Son H-J, Choi J-Y, Choi J-H*, Che W-S. Experimental and Finite Element Characterization of the Crippling Failure of Composite Stiffeners.

    Key Engineering Materials

    2006;326-328:1773-1776.
  • 4. Choi J-H*, Lee Y-H, Kweon J-H*, Jae W-S. Strength of Composite Laminated Bolted Joint Subjected to a Clamping Force.

    Key Engineering Materials

    2006;326-328:1777-1780.
  • 5. Kweon J-H*, Jung J-W, Kim T-H, Choi J-H*, Kim D-H. Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding.

    Composite structures

    2006;75:192-198.

In 2005

  • 1. Park J-M , Lee S-I, Choi J-H*. Cure monitoring and residual stress sensing of single-carbon fiber reinforced epoxy composites using electrical resistivity measurement.

    Composites Science and Technology

    2005;65:571-580.
  • 2. Ahn H-S, Kweon J-H*, Choi J-H*. Failure of Unidirectional-Woven Composite Laminated Pin-Loaded Joints.

    Journal of Reinforced Plastic and Composites

    2005;24:735-752.

In 2004

    • 1. Kweon J-H*, Ahn H-S, Choi J-H*. A New Method to Determine the Characteristic Lengths of Composite Joints without Testing.

      Composite Structures

      2004;66:305-315.

In 2003

  • 1. Kim I-Y, Lee D-G, Choi J-H*. Development of the simple dielectric sensor for the cure monitoring of high temperature composites.

    Journal of Materials Processing Technology

    2003;132:168-176.
  • 2. Jeon Y-J, Choi J-H*. Failure Load Prediction of Mechanically Fastened Composite Joint.

    Journal of Composite Materials

    2003;37:2163-2177.

In 2002

  • 1. Kweon J-H*. Crippling Analysis of Composite Stringers Based on Complete Unloading Method.

    Computers and Structures

    2002;80:2167-2175.

In 2001

  • 1. Lee G-S, Oh J-H, Lee D-G, Choi J-H*. A composite cantilever arm for guiding a moving wire in an electrical discharge wire cutting machine.

    Journal of Material Processing Technology

    2001;113:172-177.

Domestic Journal

Upadted - 2020.08.04

(*Corresponding author.)

In 2020

  • 1. 노지섭, 김경수, 남영우*. 환경규제 강화에 따른 항공기 배기가스 배출기준 개정 방안 연구.

    항공우주시스템공학회지

    2020;제14권 특별호:7-12.

In 2019

  • 1. 성정원, 최현석, 권보성, 오세운, 이상민, 남영우*, 권진회*. 자동 섬유 적층(AFP)을 활용한 열가소성 복합재의 공정 변수에 따른 기계적 물성 평가.

    한국복합재료학회

    2019;제32권 제5호:229-236.
  • 2. Jonathan Tapullima, 심형우, 권진회*, 최진호*. Analysis on Stitched Mode I Specimen Using Spring Elements.

    한국복합재료학회

    2019;제32권 제2호:
    102-107.
  • 3. 이광은, 성정원, 권진회*. 복합재 스카프 조인트에서의 마이크로 볼트 보강에 대한 타당성 연구.

    한국복합재료학회

    2019;제32권 제1호:37-44.

In 2018

  • 1. 김태형, 김철환, 최진호*. CNT를 첨가한 접착조인트의 결함탐지능 및 강도 평가에 관한 연구.

    한국복합재료학회

    2018;제31권 제4호:1-5.
  • 2. 채송수, 이광은, 안현수, 최진호*, 권진회*. 히트블랑켓과 새롭게 개발된 가압장치를 이용해 수리한 복합재 적층판의 인장강도 연구.

    한국복합재료학회

    2018;제31권 제1호:1-7.
  • 3. 곽병수, 김동관, 권진회*. 요철핀으로 보강된 복합재 모자형 체결부 구조의 강도 연구.

    한국복합재료학회

    2018;제31권 제6호:323-331.

In 2017

  • 1. 조대현, 김철환, 최진호*. 적층각 변화에 따른 복합재료 기계적 체결부의 파손강도.

    한국복합재료학회

    2017;제30권 제4호:1-6.
  • 2. 박슬기, 김철환, 최진호*. 유전기법을 이용한 속경화 수지 RTM 공정의 경화 모니터링에 대한 연구.

    한국복합재료학회

    2017;제30권 제3호:1-7.
  • 3. 곽병수, 주현우, 김홍일, 동승진, 권진회*. 새로운 개념의 복합재 샌드위치 체결부 구조의 설계와 검증.

    한국복합재료학회

    2017;제30권 제6호:384-392.

In 2016

  • 1. 이강희, 임대진, 이선홍, 박슬기, 최진호*. 항공기용 2단 차동 GRA 개발.

    한국기계가공학회

    2016;제15권 제6호:115-121.
  • 2. 김충현, 유재승, 변창석, 주현우, 박민영, 최진호*, 권진회*. 스카프 패치로 수리한 복합재 단일겹침 체결부의 파손 특성 연구.

    한국복합재료학회

    2016;제29권 제3호:117-124.
  • 3. 곽병수, 김홍일, 동승진, 최진호*, 권진회*. 새로운 형상의 복합재 샌드위치 체결부 구조의 파손거동 연구.

    한국복합재료학회

    2016;제29권 제3호:209-215.

In 2015

  • 1. 이봉남, 김철환, 권진회*, 최진호*. CNT 분산 방법에 따른 접착조인트의 저항 및 분산성 평가.

    한국복합재료학회

    2015;제28권 제6호:348-355.
  • 2. 피준우, 조영대, 전상배, 이근호:최진호*, 권진회*. 선박용 복합재 에어 스포일러의 체결부 설계 및 강도 평가.

    한국복합재료학회

    2015;제28권 제4호:219-225.
  • 3. 한준수, 배병환, 김지현, 최진호*, 권진회*. AFP로 제작된 두꺼운 복합재료 스파의 제작 및 구조 해석.

    한국복합재료학회

    2015;제28권 제4호:212-218.

In 2014

  • 1. 박성준, 고명균, 김동관, 김상국, 문창오, 권진회*, 최진호*. 복합재 적층판의 전단좌굴시험을 위한 치구설계 및 검증.

    한국복합재료학회

    2014;제27권 제4호:
    158-167.
  • 2. 김철환, 최진호*, 권진회*. Composite Fracture Detection Capabilities of FBG Sensor and AE Sensor.

    한국복합재료학회

    2014;제27권 제4호:152-157.

In 2013

  • 1. 이옥규, 안대건, 최진호*, 권진회*. 유리섬유복합재의 드릴가공조건에 대한 박리지수와 표면조도 특성.

    한국복합재료학회

    2013;제26권 제7호:1-7.
  • 2. 윤종화, 최진호*, 권진회*. L-형 보강재를 가진 복합재 패널의 제작과 평가.

    한국복합재료학회

    2013;제26권 제2호:99-104.
  • 3. 롸르네, 박용빈, 권진회*, 최진호*. 곡면형상의 알루미늄 하니콤/CFRP 샌드위치 패널에 대한 실험적 연구.

    한국복합재료학회

    2013;제26권 제2호:85-90.

In 2012

  • 1. 정강우, 최진호*, 권진회*. 원공공차를 가진 볼트 조인트와 핀 조인트의 강도평가에 관한 연구.

    한국복합재료학회

    2012;제25권 제6호:186-190.
  • 2. 이병희, 박용빈, 최진호*, 권진회*, 최익현, 장성태. 금속 핀으로 보강된 복합재 단일겹침 체결부의 강도 연구.

    한국복합재료학회

    2012;제25권 제3호:65-69.
  • 3. 정강우, 박용빈, 최진호*, 권진회*. 기계 가공된 복합재료 키 조인트의 강도 연구.

    한국복합재료학회

    2012;제25권 제2호:40-54.

In 2011

  • 1. 이흔주, 신인수, 정문규, 권진회*, 최진호*. 원공을 가지는 복합재 적층판의 인장강도 예측 기법.

    한국복합재료학회

    2011;제24권 제4호:29-35.
  • 2. 김지선, 이경찬, 권진회*, 최진호*, 조종래, 조상래, 조윤식. 수중운동체 적용을 위한 샌드위치 복합재 원통의 좌굴 해석 및 시험.

    한국복합재료학회

    2011;제24권 제4호:17-22.
  • 3. 양현정, 정문규, 권진회*, 최진호*. 서로 다른 수분율을 갖도록 염수환경에 노출된 복합재 접착체결부의 강도.

    한국복합재료학회

    2011;제24권 제4호:48-54.
  • 4. 박용빈, 권진회*, 최진호*, 조현일. 전단하중을 받는 알루미늄 하니콤 샌드위치의 체결방식이 체결부의 파손에 미치는 영향 연구.

    한국항공우주학회

    2011;제39권 제7호:643-651.
  • 5. 박진하, 최진호*, 권진회*. AE 기법을 이용한 외부수압을 받는 복합재 원통의 균열 검출.

    한국복합재료학회

    2011;제24권 제3호:25-30.
  • 6. 박용빈, 양현정, 권진회*, 최진호*, 조현일. 풀아웃 하중을 받는 복합재 샌드위치 체결부의 파손거동 연구.

    한국복합재료학회

    2011;제24권 제1호:17-23.

In 2010

  • 1. 최배현, 신상준, 송민환, 권진회*, 최진호*. 샌드위치와 적층판을 접착한 단일겹침 체결부의 고온 습도 강도특성 연구.

    한국항공우주학회

    2010;제38권 제11호:1115-1122.
  • 2. 문철진, 권진회*, 최진호*. 마이크로 유전자 알고리즘을 이용한 외부 수압을 받는 필라멘트 와인딩 복합재 원통의 최적 설계.

    한국복합재료학회

    2010;제23권 제4호:14-20.
  • 3. 김건희, 임도완, 최진호*, 권진회*, 이태주, 송민환, 신상준. 모자형 보강재를 가진 복합재 패널의 제작과 평가.

    한국복합재료학회

    2010;제23권 제2호:31-39.
  • 4. 박재현, 최진호*, 권진회*. 후판 단일 겹침 접착 조인트의 파손강도에 관한 연구.

    한국항공우주학회

    2010;제38권 제2호:119-128.
  • 5. 송민규, 권진회*, 최진호*, 김효진, 송민환, 신상준, 변재현. 고온습도 및 저온 환경이 복합재 접착 체결부 강도에 미치는 영향 연구.

    한국항공우주학회

    2010;제38권 제2호:111-118.

In 2009

  • 1. 송민규, 권진회*, 최진호*, 김효진, 송민환, 신상준. 항공용 복합재 단일겹침 접착 체결부의 제작공정에 따른 강도 연구.

    한국항공우주학회

    2009;제37권 제8호:
    751-758.
  • 2. 안정희, 권진회*, 최진호*. 케블라 복합재 평판의 고속충돌 특성 수치해석.

    한국복합재료학회

    2009;제22권 제2호:18-23.
  • 3. 이영환, 박재현, 안정희, 최진호*, 권진회*. 복합재 하이브리드 조인트의 파손강도에 관한 연구.

    한국복합재료학회

    2009;제22권 제2호:7-13.
  • 4. 문철진, 허성화, 안정희, 권진회*, 최진호*, 조종래, 조상래. 외부 수압을 받는 필라멘트 와인팅 후판 복합재 원통의 좌굴 연구.

    한국항공우주학회

    2009;제37권 제2호:147-155.

In 2008

  • 1. 문철진, 이청락, 권진회*, 최진호*, 조맹효, 김태경. 염수환경에 노출된 고강성 탄소/에폭시 복합재의 물성치 변화 연구.

    한국복합재료학회

    2008;제21권 제6호:1-7.
  • 2. 김중진, 성명수, 김홍주, 차봉근, 권진회*, 최진호*. 복합재-알루미늄 단일겹침 하이브리드 체결부 강도 특성 실험 연구.

    한국항공우주학회

    2008;제36권 제9호:841-850.
  • 3. 이영환, 반창수, 최진호*, 권진회*. 파손영역비를 이용한 복합재 접착 체결부의 파손강도 예측.

    한국복합재료학회

    2008;제21권 제4호:22-28.
  • 4. 허성화, 김정희, 김홍석, 권진회*, 최진호*, 조종래, 조윤식. 염수환경에 의한 탄소/에폭시 복합재의 물성치 변화 연구.

    한국복합재료학회

    2008;제21권 제3호:1-8.

In 2007

  • 1. 최지영, 송근일, 권진회*, 최진호*, 김광수, 장영순. 복합재-하니콤 샌드위치 구조물의 인써트 조인트 강도 특성 연구.

    한국복합재료학회

    2007;제20권 제5호:26-33.
  • 2. 김태환, 성명수, 권진회*, 최진호*. 탄소 복합재-알루미늄 단일겹침 접착 체결부의 강도에 관한 인자연구.

    한국복합재료학회

    2007;제20권 제5호:34-42.
  • 3. 조상래, 김현수, 구정본, 조종래, 권진회*, 최진호*. 수압을 받는 복합재 원통의 최종강도 실험 연구.

    한국해양공학회

    2007;제21권 제3호:52-57.
  • 4. 김태환, 이창재, 권진회*, 최진호*. 탄소 복합재와 알루미늄 이종재료 단일겹침 접착 체결부의 강도에 관한 실험 연구.

    한국항공우주학회

    2007;제35권 제3호:204-211.
  • 5. 손희진, 권진회*, 최진호*, 조종래, 조상래. 외부 수압을 받는 복합재 원통의 후좌굴 해석.

    한국항공우주학회

    2007;제35권 제3호:196-203.
  • 6. 유연호:최진호*, 권진회*. 매트릭스형 피에조센서를 이용한 복합재료 AE 신호 분석에 관한 연구.

    한국비파괴검사학회

    2007;제27권 제1호:1-7.

In 2006

  • 1. 박효근, 김동현, 최진호*, 권진회*, 이영환, 양승운. 대형 LCD 패널 제조용 복합재 롤러의 회전체 동역학 해석.

    한국복합재료학회

    2006;제19권 제6호:8-15.
  • 2. 정재우, 송민환, 권진회*, 최진호*. 접착제에 따른 복합재-알루미늄 이중겹침 하이브리드 체결부 강도특성 연구.

    한국항공우주학회

    2006;제34권 제3호:44-50.
  • 3. 최진호*, 권진회*, 허선철. A Study on Strength Evaluation and Processing Analysis of Joint Structure.

    항공기 부품 기술연구소

    2006;제1권 제1호:67-70.

In 2005

  • 1. 류충오, 최진호*, 권진회*. 클램핑 포스가 존재하는 복합재료 체결부의 파손강도 예측.

    한국복합재료학회

    2005;제18권 제5호:9-14.

In 2004

  • 1. 전영준, 최진호*, 권진회*, 이상찬. 선형해석을 이용한 복합재료 기계적 체결부의 강도평가에 관한 연구.

    한국항공우주학회

    2004;제32권 제9호:49-56.
  • 2. 이창훈, 최진호*, 권진회*. 복합재료의 파손 감지를 위한 동조형 음향방출 신호분석 기법.

    한국항공우주학회

    2004;제32권 제3호:30-36.
  • 3. 이창훈, 박재읍, 최진호*, 권진회*, 제우성, 김성호. 폐 페인트를 이용한 폴리머 콘크리트의 제조에 관한 연구.

    한국복합재료학회

    2004;제17권 제2호:21-27.
  • 4. 신소영, 권진회*, 최진호*. 일방향-평직 혼합적층 복합재 체결부의 점진적 파손해석.

    한국항공우주학회

    2004;제32권 제1호:37-43.
  • 5. 최진호*, 이상찬. 금속박판과 프로젝션 용접을 이용한 쾌속 조형법의 개발.

    대한용접학회

    2004;제22권 제2호:46-50.

In 2003

  • 1. 전영준, 최진호*, 권진회*. 파괴면적지수법을 이용한 복합재료 기계적 체결부의 강도평가에 관한 연구.

    한국복합재료학회

    2003;제16권 제5호:1-6.
  • 2. 최진호*, 안현수, 권진회*. 복합재 체결부의 파손해석을 위한 새로운 특성길이 결정 방법.

    한국복합재료학회

    2003;제16권 제4호:10-21.
  • 3. 안현수, 신소영, 권진회*, 최진호*, 이상관, 양승운. 일방향-평직 복합재 혼합 적층판의 체결부 강도 연구.

    한국항공우주학회

    2003;제31권 제1호:25-33.

In 2002

  • 1. 권진회*, 강경국, 박찬우, 김승호. 다중스파 날개의 유한요소 이상화 방법에 관한 인자연구.

    한국항공우주학회

    2002;제30권 제6호:107-115.
  • 2. 최진호*, 전영준, 권진회*. 기계적으로 체결된 복합재료 조인트의 강도에 관한 연구.

    한국복합재료학회

    2002;제15권 제4호:9-16.
  • 3. 박노회, 권진회*, 김종훈, 변준형, 양승운, 구만회. 핀하중을 받는 유리/에폭시 평직 적층판의 체결부 강도.

    한국복합재료학회

    2002;제15권 제2호:1-10.
  • 4. 최진호*, 전영준, 정희택, 이상찬, 김태일, 김동우. 액셜 피스톤 유압펌프의 슈 플레이트 스프링 설계 및 성능평가.

    대한기계학회

    2002;제26권 제11호:2220-2228.

In 2001

  • 1. 최상민, 권진회*. Z-단면 Graphite/Epoxy 스트링거의 크리플링 실험.

    한국복합재료학회

    2001;제14권 제3호:32-41.
  • 2. 최진호*, 김일영, 이대길. 고온복합재료의 경화모니터링을 위한 고온 유전센서의 제작 및 성능평가에 관한 연구.

    한국복합재료학회

    2001;제14권 제1호:30-38.

In 2000

  • 1. 권진회*. 복합재 보강재의 크리플링 응력에 관한 인자 연구.

    한국항공우주학회

    2000;제28 제2호:80-87.
  • 2. 김진호:권진회*. 일정 횡압력과 증분 압축하중을 동시에 받는 복합재 쉘의 비선형 해석을 위한 수치기법 연구.

    한국복합재료학회

    2000;제13권 제1호:69-77.
  • 3. 최진호*. 방전가공기용 복합재료 외팔보의 제작 및 성능평가.

    한국복합재료학회

    2000;제13 제6호:39-46.
  • 4. 최진호*, 송민근, 송태영, 주은선. Hyper 빔창주위의 열유동해석에 의한 안전성평가에 관한 연구.

    경상대학교 생산기술연구소

    2000;제16권:291-298.