메뉴

경상대학교 복합재구조 실험실 메뉴

경상대학교 복합재구조 실험실

닫기

Publications

International Conference

Upadted - 2020.05.26

(*Corresponding author.)

In 2020

  • 1. Roy R, Kweon J-H*, Nam Y-W*. "Tensile strength of multi-angle composite laminate scarf joints with FEM".

    IOP Conference Series: Materials Science and Engineering.

    2020;784:012007.

In 2019

  • 1. Prince Raj Lawrence Raj, Hojin Jeong, Rene Roy, Jin-Hwe Kweon*, Rho Shin Myong. "Computational Simulation of an Electrically Heated Ice Protection System for Composite Leading Edges of Aircraft".

    SAE international

    . 2019.
  • 2. Boseong-Kwon, Hyeon-Seok Choe, Jung-Won Sung, Young-Woo Nam*, Jin-Hwe Kweon*. "Influence of process parameters on mechanical properties of CF/PEKK composites manufactured by automated fiber placement".

    ICACM

    . 2019.
  • 3. Van-Tho Hoang, Gi-Won Jeong, Viet-Hoai Truong, Young-Woo Nam*, Jin-Hwe Kweon*. "Hybrid composites of glass fabric/ epoxy and glass fabric coated Nickel/ epoxy under lightning strike".

    ICACM

    . 2019.
  • 4. Joon-huyng Shin, Ga-Young Ahn,Young-Woo Nam*, Jin-Hwe Kweon*. "A study on the resin injection repair method for the damaged composite structure".

    ICACM

    . 2019.
  • 5. Rene Roy, Young-Woo Nam*, Jin-Hwe Kweon*. "Tensile strength of multi-angle composite laminate scarf joints with FEM".

    ICACM

    . 2019.
  • 6. Hyeon-Tae Cho, Seong-Min Park, Young-Woo Nam*, Jin-Hwe Kweon*. "Surface Treatment Method for Improving Adhesive Bonding Strength of CFRP / Ni-Cr Alloy".

    ICACM

    . 2019.
  • 7. Van-Tho Hoang, Viet-Hoai Truong, Young-Woo Nam*, Jin-Hwe Kweon*. "Delamination of angle-ply laminate composites under open loading using cohesive zone method".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2019.
  • 8. Rene Roy, Seong-Min Park, Jin-Hwe Kweon*, Young-Woo Nam*. "Brief Review of Surface Treatment for Bonding of Thermosetting Composites".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2019.
  • 9. Gi-Won Jeong, Byeong-Su Kwak, Jin-Hwe Kweon*, Young-Woo Nam*. "Scarf patch repair method for Radar Absorbing Structure with lightning strike damage".

    ICCS22&CCCS1

    . 2019.
  • 10. Seong-Min Park, Hyeok-Seok Choe, Jin-Hwe Kweon*. "Physical Surface Preparation to Enhance Adhesion Strength of CFRP / INCONEL 625".

    ICCS22&CCCS1

    . 2019.
  • 11. Viet-Hoai Truong, Byeong-Su Kwak, Rene Roy, Jin-Hwe Kweon*. "Cohesive zone method for failure analysis of scarf patch-repaired composite laminates under bending load".

    ICCS22&CCCS1

    . 2019.
  • 12. Byeong-Su Kwak, Gi-Won Jeong, Won-Ho Choi, Jin-Hwe Kweon*, Young-Woo Nam*. "Fabrication of broadband radar absorbing composite sandwich structure containing honeycomb core made with Ni-coated glass fabric".

    ICCS22&CCCS1

    . 2019.
  • 13. Ji-Sub Noh, Bo-Seong Kwon, Hyeon-Tae Cho, Jin-Hwe Kweon*. "Effect of Adhesive Crack for Single-lap Bonded Joint at Extreme Environment".

    ICCS22&CCCS1

    . 2019.
  • 14. Woo-Jin An, Jin-ho Choi*. "Study on Structural Properties of Laminated Composite Using I-fiber Stitching".

    ICCS22&CCCS1

    . 2019.
  • 15. Song Sang Hoon, Kim Hae Jin. "Study on Mode II Structural Analysis on Composite Laminate applied I-fiber Stitching Method".

    ICCS22&CCCS1

    . 2019.
  • 16. Man-sung Kim, Jin-ho Choi*. "A Study on the in-plane properies of reinforced composite laminate by I-fiber stitching process".

    ICCS22&CCCS1

    . 2019.
  • 17. Hyung-woo Sim, Jin-ho Choi*. "A Study on Impact Test and Post Impact Test of Composite with I-fiber Stitching Method".

    ICCS22&CCCS1

    . 2019.
  • 18. Hyung-woo Sim, Woo-Jin An. "A study on single-lap joint using I-fiber method".

    ISMAI-14

    . 2019.
  • 19. Joong-Tak Back, Woo-Jin An. "Impact characteristics of laminated composite reinforced by I-fiber stitching process".

    ISMAI-14

    . 2019.
  • 20. Gyu-Yeong Park, Woo-Jin An. "In-plane properties and failure mechanism of composite using I-fiber stitching method".

    ISMAI-14

    . 2019.
  • 21. Bo-Seong Kown, Hyeon-Seok Choe, Jung-Won sung, Young-Woo Nam*, Jin-Hwe Kweon*. "Influence of consolidation process on voids and interlaminar shear strength of CF/PEKK laminates".

    ISMAI-14

    . 2019.
  • 22. Hyeon-Tae Cho, Seong-Min Park, Young-Woo Nam*, Jin-Hwe Kweon*. "Study on Surface Treatment Method to Improve Adhesive Bonding Strength of Composite / Ni-Cr Alloy".

    ISMAI-14

    . 2019.
  • 23. Joon-huyng Shin, Byeong-Su Kwack, Young-Woo Nam* , Jin-Hwe Kweon*. "A study on the radar absorbing structure repaired with the scarf patch method stitching method".

    ISMAI-14

    . 2019.
  • 24. Joong-Tak Back, Jin-ho Choi*. "A study on the impact of 3D-reinforced composite".

    AAME 2019

    . 2019.
  • 25. Gyu-Yeong Park, Woo-Jin An, Jin-ho Choi*. "A Study on the in-plane properties and failure mechanism of composite appliedI-fiber stitching method".

    AAME 2019

    . 2019.
  • 26. Joonhyung SHIN, Byeongsu KWAK, Jin-Hwe Kweon*, Youngwoo NAM*. "Investigation on the recovery of electromagnetic and mechanical properties of RAS repaired with scarf patch repair method".

    AAME 2019

    . 2019.
  • 27. BoSeong KWON, Jung Won SUNG, Byeong Su KWAK, Jin-Hwe Kweon*, Young Woo NAM*. "Radar absorbing structure containing nickel-coated aramid fabric considering moisture absorption protection".

    AAME 2019

    . 2019.
  • 28. Hyeon-Tae CHO, Seong-Min PARK, and Jin-Hwe Kweon*. "Study on Physical Surface Treatment Method for Adhesive Bonding Strength Improvement of Composite / INCONEL".

    AAME 2019

    . 2019.
  • 29. An Woojin, Choi Jinho*. "Study on Structural Integrity of Composite Applied I-fiber Stitching".

    MECHCOMP 2019

    . 2019.
  • 30. Tapullima, Jonathan; Choi, Jin-Ho*. "Mode II Structural Analysis on Composite Laminate using I-Fiber Stitching Process".

    MECHCOMP 2019

    . 2019.
  • 31. Sim Hyungwoo, An Woojin, Choi Jinho*. "A Study on the Compression After Impact (CAI) Strength of specimen with I-FiberStitching Method Strike Damage".

    MECHCOMP 2019

    . 2019.
  • 32. Jeong Gi Won, Kwak Byeong Su, Kweon Jin-Hwe*, Nam Young Woo*. "Characteristics of Scarf-repaired Radar Absorbing Structure Considering Lightning Strike Damage".

    MECHCOMP 2019

    . 2019.
  • 33. Sung Jung Won, Kwak Byeong Su, Kweon Jin-Hwe*, Nam Young Woo*. "RAS Containing Nickel-Coated Kevlar Fabric Considering Protection of Moisture Absorption".

    MECHCOMP 2019

    . 2019.
  • 34. Byeong-Su Kwak, Gi-Won Jeong, Won-Ho Choi, Jin-Hwe Kweon*, Young-Woo Nam*. "Fabrication of broadband radar absorbing honeycomb sandwich structure containing Ni-coated glass fabric".

    MECHCOMP 2019

    . 2019.
  • 35. Choe, Hyeon-Seok; Kweon, Jin-Hwe*. "Parametric study of thermoplastic tow-placement process with in-situ consolidation".

    MECHCOMP 2019

    . 2019.
  • 36. Park Seong Min, Choe Hyeon Seok, Kweon Jin-Hwe*. "Study on optimum surface treatment method to improve adhesion strength between composites / INCONEL structures".

    MECHCOMP 2019

    . 2019.
  • 37. Ji Sub Noh, Jin-Hwe Kweon*. "A Study on Effect of Crack Growth in Bonded Joint after Water Absorption/Freezing".

    MECHCOMP 2019

    . 2019.

In 2018

  • 1. Woo-Jin An, Cheol-Hwan Kim, Jin-ho Choi*. "A study on the Static strength of RTM composite joint by I-Fiber stitching method".

    ISMAI-13

    . 2018.
  • 2. Hyung-woo Sim, Cheol-Hwan Kim, Jin-ho Choi*,"A study on the in-plane tensile strength of composite stitched by the carbon fiber".

    ISMAI-13

    . 2018.
  • 3. Woo-Jin An, Cheol-Hwan Kim, Jin-ho Choi*. "Static Strength of Composite Single-Lap Joint by New Stitching Method".

    ACCM-11

    . 2018.
  • 4. So-Jung Baek, Cheol-Hwan Kim, Jin-ho Choi*. "A Study on Defect Detectability in Adhesive Joints using Electrical Impedance Method".

    ACCM-11

    . 2018.
  • 5. Man-sung Kim, Cheol-Hwan Kim, Jin-ho Choi*. "Study on the In-Plane Properties of Reinforced Composite Laminate by New Stitching Process".

    ACCM-11

    . 2018.
  • 6. Cheol Hwan Kim, Jin Ho Choi*. "Fracture Toughness Evaluation of DCB specimen with New 1-thread Stitching in thickness direction,".

    MECHCOMP 2018

    . 2018.
  • 7. Jonathan Tapullima, Jin Ho Choi*. "Structural Analysis of Composite Laminate using Novel Stitching Process".

    MECHCOMP 2018

    . 2018.
  • 8. So Jung Baek, Cheol Hwan Kim, Jin Ho Choi*. "A Study on the Defect Detectability Using Electrical Resistance Method in Composite to Composite Single-lap Joint".

    MECHCOMP 2018

    . 2018.
  • 9. Woo Jin An, Cheol Hwan Kim, Jin Ho Choi*. "Static strength of RTM composite joint by new stitching method".

    MECHCOMP 2018

    . 2018.
  • 10. Hyun Sung Yoon, Cheol Hwan Kim, Jin Ho Choi*. "A study on the in-plane tensile strength of composite stitched by the carbon fiber".

    MECHCOMP 2018

    . 2018.
  • 11. Gwang-Eun Lee, Ji-Sub Noh, Jin-Hwe Kweon*. "A study on Bending Characteristics of Scarf Joint Laminates Reinforced with Microbolt".

    MECHCOMP 2018

    . 2018.
  • 12. Gyu-Seok Kang, Jin-Hwe Kweon*. "Hybrid repair of Steel Micro-bolt and Adhesive for Composite Laminate with Delamination".

    MECHCOMP 2018

    . 2018.

In 2017

  • 1. Byeong-su Kwak, Jin-Hwe Kweon*. "An experimental study on Novel Composite Sandwich Joint Structures".

    APISA 2017

    . 2017.
  • 2. Viet-Hoai Truong , Hyeon-Seok Choe and Jin-Hwe Kweon*. "Failure load prediction of C-shaped composite laminates using cohesive zone model".

    APISA 2017

    . 2017.
  • 3. Song-su Chae, Sang-Hyun Song, Jin-Hwe Kweon* "An experimental demonstration of the pressurizer".

    ICCM 21

    . 2017.
  • 4. Hyeon-seok Choe, Gwang-eun Lee, Byeong-su Kwak, Jin-Hwe Kweon*. "A Study on Fatigue Characteristics of Scarf Joint-Repaired Composite Laminate Under Various Temperature Environments".

    ICCM 21

    . 2017.
  • 5. Sang-Seon Park, Gyu-Seok Kang, Jin-Hwe Kweon*. "A Repair Method of Delaminated Composite Structures Using Micro Blots".

    ICCM 21

    . 2017.
  • 6. Yu-Cheol Jeon, Jin-ho Choi*. "A Study on the fracture strength of composite structure stitched with single fiber".

    Mechcomp 3

    . 2017.
  • 7. Cheol-Hwan Kim, Jin-ho Choi*. "Strength Evaluation of Composite Single-lap joint reinforced by New stitching and Z-pinning Method".

    Mechcomp 3

    . 2017.
  • 8. Tae-Hyeong Kim, Jin-ho Choi*. "A Study on the Strength Evaluation and Defect Detection Capability of Adhesive Joints According to CNT Content of Electric Resistance Method".

    Mechcomp 3

    . 2017.
  • 9. Sang-Seon Park, Jin-Hwe Kweon*. "A Novel Repair Method for Delaminated Composite Laminate using Micro-bolts".

    Mechcomp 3

    . 2017.
  • 10. Byeong-Su Kwak, Sang-Seon Park, Jin-Hwe Kweon*. "Buckling Behavior of Delaminated Composite Laminates after Microbolt-Repai".

    Mechcomp 3

    . 2017.
  • 11. Song-Su Chae, Hyeon Cho, Hyon-Su Ahn, and Jin-Hwe Kweon*". An experimental demonstration of pressurizer for repairing composite structures".

    Mechcomp 3

    . 2017.
  • 12. Hyeon-seok Choe. "Fatigue characteristics of scarf-joint composite laminate in various thermal environments".

    Mechcomp3

    . 2017.
  • 13. Gwnag-Eun Lee, Song-Su Chae, and Jin-Hwe Kweon*. "Effect of Curing Pressure on the Strength of Scarf Patch-Repaired Composite Laminates".

    ISMAI-12

    . 2017.
  • 14. Gyu-Seok Kang, Sang-Seon Park and Jin-Hwe Kweon*. "Buckling Behavior of Composite Laminates with Delamination Repaired byMicro-bolts".

    ISMAI-12

    . 2017.

In 2016

  • 1. Seul-Ki Park, Jin-ho Choi*. "The composites cure monitoring using noise protected dielectrometry equipment".

    ACCM 10

    . 2016.
  • 2. Song-Su Chae, Byeong-Su Kwak, Ga-Young Ahn, Hyeon-Seok Choe, Jin-ho Choi*, and Jin-Hwe Kweon*. "Tensile strength of adhesive-repaired composite panels with various couring pressure".

    ACCM 10

    . 2016.
  • 3. Sang-Seon Park, Choong-Hyun Kim, Jin-ho Choi*, Jin-Hwe Kweon*. "Experimental study on the repair methods for composite single-lap joints".

    ACCM 10

    . 2016.
  • 4. Khanh hung Nguyen, Hyun-Woo Ju, Jin-Hwe Kweon*, and Jin-ho Choi*. "Analysis of curved laminated beam with z-pin reinforcement".

    ICCS 19

    . 2016.
  • 5. Byeon C.S, Choi J.H, kweon J.H*. "Experimental investigation on the static characteristic of scarf adhesive joint in various thermal environments".

    ICCS 19

    . 2016.
  • 6. Hyun-Woo Ju, Khanh-Hung Nguyen, Jin-ho Choi*,and Jin-Hwe Kweon*. "Effect of Z-pin on delamination resistance of curved composite structures".

    ICCS 19

    . 2016.
  • 7. Ahn G.Y, Choi J.H, kweon J.H*. "Effect of bonding pressure on the tensile stsrength of scarf patch-repaired laminates".

    ICCS 19

    . 2016.
  • 8. Beyeong-Su Kwak,Seung-Jin Dong, Hong-Il Kim, Jin-ho Choi*, Jin-Hwe Kweon*. "Investigation on the behavior of novel composite sandwich structures".

    ICCS 19

    . 2016.
  • 9. Seul Ki Park, Hyon Su Ahn, Jin Hwe Kweon*, Jin Ho Choi*. "Effects of CNT content and surface treatment on the defect detectabilities and static strengghs of adhesive joint".

    ICCS19

    . 2016.
  • 10. Dae Hyeon Jo, Cheol Hwan Kim, Jin Hwe Kweon*, Jin Ho Choi*. "Failure strength of the composite T-joint stitched by the carbon fiber".

    ICCS19

    . 2016.
  • 11. Jin-ho Choi*. "Measurement of the resin flow and degree of cure by the multi-channel dielectric sensor in fast cure RTM process".

    ICCS19

    . 2016.
  • 12. Jin-ho Choi*. "Study on in-plane property of the composite stitched by the carbon fiber".

    ISMAI-11

    . 2016.
  • 13. Seul-Ki Park, Jin-ho Choi*. "The composites cure monitoring using noise protected dielectrometry equipment".

    ACCM10

    . 2016.
  • 14. Jin-ho Choi*. "The evaluation on defect detectability for impedance method using surface modified CNT".

    ACCM10

    . 2016.

In 2015

  • 1. Chang-Seok Byeon,Jae-Seung Yoo, Min-Young Park, Jin-ho Choi*, and Jin-Hwe Kweon*. "Experimental investigation on the characteristics of repaired composite laminates with various parameters".

    APISAT 2015

    . 2015.
  • 2. Byeong-Su Kwak, Jae-Seung Yoo, Min-Young Park, Jin-ho Choi*, and Jin-Hwe Kweon*. "Strength recovery of the repaired composite laminates using a scarf patch".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2015.
  • 3. Ga-Young Ahn, June-Woo Pi, Min-Young, Park, Jin-ho Choi*, and Jin-Hwe Kweon*. "Comparison of strength Recovery rates in respect of repaired single-lap joint".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2015.
  • 4. Byeong-Su Kwak, Jae-Seung Yoo, Min-Young Park, Jin-ho Choi*, Jin-Hwe Kweon*. "Evaluation of the damaged laminate strength recovery after the repair using a scarf patch".

    Composites Seoul 2015

    . 2015.
  • 5. Ga-Young Ahn, Choong-Hyun Kim, Min-Young Park, Jin-ho Choi*, Jin-Hwe Kweon*. "Strength Recovery rate of repaired single-lap joints".

    Composites Seoul 2015

    . 2015.
  • 6. Jae-Seung Yoo, Min-Young Park, Jin-Ho, Choi, and Jin-Hwe Kweon*. "Experimental Study on Tensile Strength of Scarf Patch Repaired Composite Laminates".

    ISMAI-10

    . 2015.
  • 7. June-Woo Pi, Choong-Hyun Kim, Jin-ho Choi*, and Jin-Hwe Kweon*. "pplication of Composite Repair for Single-lap Joint".

    ISMAI-10

    . 2015.
  • 8. Viet-Hoai Truong, Choong-Hyun Kim, Jae-Seung Yoo, Jin-ho Choi*, Jin-Hwe Kweon*. "Prediction Failure Load of Adhesively Bonded Scarf Joints by Damage Zone Method".

    ISMAI-10

    . 2015.
  • 9. Truong Hoai V, Jin-Hwe Kweon*, Jin-ho Choi*. "Failure load prediction of scarf patched composite single-lap joints by FEM".

    ICACM 2015

    . 2015.
  • 10. Bong-Nam Lee, Jin-Hwe Kweon*, Jin-ho Choi*. "Surfce defect detedtion of the adhesive joint by measuring the normal and lateral impedances of adhesive joints with the carbon nanotubes".

    ICACM 2015

    . 2015.
  • 11. Jae-Seung Yoo, Jin-Hwe Kweon*, and Jin-ho Choi*. "Investigation on strength recovery of scarf patch repaired composite laminates".

    ICACM 2015

    . 2015.
  • 12. Seong-Yoon Yoo, Jin-Hwe Kweon*, and Jin-ho Choi*. "The structural analysis and strength evaluation of the rivet nut joint for composite repair".

    ICACM 2015

    . 2015.
  • 13. Kumar Deepak, Jin-Hwe Kweon*, and Jin-ho Choi*. "Numerical Evaluation of Stiffness Degradation in Cross-ply Laminates due to Matrix cracking and Fiber splitting".

    ICACM 2015

    . 2015.
  • 14. Choong-Hyun Kim, Jin-Hwe Kweon*, and Jin-ho Choi*. "Static and Fatigue Strength of Repaired Composite single-lap joints".

    ICACM 2015

    . 2015.
  • 15. Ji-Hyun Kim, Jin-Hwe Kweon*, Jin-ho Choi*. "Finite Element Analysis of Composite Structures with Corner Radius".

    ICACM 2015

    . 2015.
  • 16. June-Woo Pi, Jin-Hwe Kweon*, Jin-ho Choi*. "Composite single-lap joint repair according to various parameters".

    ICACM 2015

    . 2015.
  • 17. Jin-ho Choi*. "Advances in mechanics of composite of materials and structures".

    AMCMS-4

    . 2015.
  • 18. Jin-ho Choi*. "Measurement of the resin flow and degree of cure by the multi-channel dielectric system in the RTM process".

    AMCMS-4

    . 2015.
  • 19. Jin-ho Choi*. "Surface defect detection of the adhesive joint by measuring the normal and lateral impedances of adhesive joints with the carbon nanotubes".

    CACMS2015

    . 2015.

In 2014

  • 1. J. W. Pi, M. G. Ko, J. H. Kweon*, J. H. Choi*. "Fatigue Performance of Jagged Shaped Metal Pin-Reinforced Composite Single-lap Joints in a Harsh Environment".

    ACCM 09

    . 2014.
  • 2. Jin-ho Choi*. "Evaluation of joint strength degradation using the impedance method in the adhesive joint".

    Mechcomp2014

    . 2014.
  • 3. V. H. Truong, D. Kumar, J. H. Kweon*, R. Roy, J. H. Choi*. "Design, Analysis and Manufacturing of AFP Mandrel for Composite Aircraft Fuselage Skin".

    ACCM 09

    . 2014.
  • 4. B. N. Lee, J. H. Choi*, J. H. Kweon*. "Fatigue Strengths of the Adhesive Joint with Carbon Nano Tubes".

    ACCM 09

    . 2014.
  • 5. J. S. Yoo, S. J. Park, J. H. Kweon*, J. H. Choi*. "Shear Buckling Test for Composite Laminate Using a Picture Frame Shaped Fixture".

    ACCM 09

    . 2014.
  • 6. S. Y. Yoo, J. H. Choi*, J. H. Kweon*. "The Structural Analysis and Strength Evaluation of the Rivet Nut Joint for Composite Repair".

    ACCM 09

    . 2014.
  • 7. C. H. Kim, D. G. Kim, J. H. Kweon*, and J. H. Choi*. "Static and Fatigue Strength of Composite Hat-Joints Reinforced by Embossing Stainless Steel Pins".

    ACCM 09

    . 2014.
  • 8. J. H. Kim, S. J. Park, J. H. Kweon*, J. H. Choi*. "Corner Radius Stress Analysis of Aircraft Composite Wing C-Spar".

    ACCM 09

    . 2014.
  • 9. Rene Roy, Jin-Hwe Kweon*, Jin-ho Choi*. "Structural Health Monitoring Technology for Composite Aircraft".

    ISAT 2014

    . 2014.
  • 10. Rene Roy, Jae-Seung Yoo, Jin-Hwe Kweon*, and Jin-ho Choi*. "Monitoring of Damaged and Repaired Curved CFRP Laminates".

    ASHMCS 2014

    . 2014.
  • 11. Cheol-Hwan Kim, Jin-ho Choi*, and Jin-Hwe Kweon*. "Evalutation of Joint Strength Degradation Using the Impedance Method in the Adhesive Joint".

    First International Conference on Mechanics of Composites

    . 2014.
  • 12. Dong-Gwan Kim, Jin-Hwe Kweon*, and Jin-ho Choi*. "Fatigue Characteristic of Embossing Stainless Steel Pin-reinforced Composite Hat Joint in Harsh Environmental Conditions".

    First International Conference on Mechanics of Composites

    . 2014.
  • 13. Myung-Gyun Ko, Jin-Hwe Kweon*, and Jin-ho Choi*. "Fatigue Characteristics of Embossing Pin-Reinforced Composite Single-Lap Joints in a Hygrothermal Environment".

    First International Conference on Mechanics of Composites

    . 2014.
  • 14. Rene Roy, Sung-Jun Park, Jin-Hwe Kweon*, and Jin-ho Choi*. "Experimental and numerical evaluation of the mixed-mode failure envelope of Nomex honeycomb cores".

    First International Conference on Mechanics of Composites

    . 2014.
  • 15. Sung-Jun Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Through-Thickness Stresses in Corner Radius of Thick Composite Structures".

    First International Conference on Mechanics of Composites

    . 2014.
  • 16. Rene Roy, Jin-Hwe Kweon*, Jin-ho Choi*. "Honeycomb Sandwich Bolt Insert FEM Parametric Analysis".

    ICAAT 2014

    . 2014.

In 2013

  • 1. Deepak Kumar, Jin-Hwe Kweon*, and Jin-ho Choi*. "Damage evaluation due to low velocity impact on laminated composite".

    Japan-Korea Joint Symposium on Composite Materials

    . 2013.
  • 2. Cheolhwan Kim, Jinho Choi*, and Jin-Hwe Kweon*. "A study on the fatigue characteristics of the adhesive joint with carbon nanotubes".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2013.
  • 3. Sung-jun Park, Rene Roy, Jin-Hwe Kweon*, and Jin-ho Choi*. "A study on material properties of Nomex honeycomb".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2013.
  • 4. Myung-Gyun Ko, Han-Gi Son, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Fatigue performance of stainless steel pinreinforced composite single-lap joints in a hygrothermal environment condition".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2013.
  • 5. Dong-Gwan Kim, Hun Ji, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Fatigue strength of hat-stiffened composite joint reinforced by stainless steel pin under pull-off loading".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2013.
  • 6. Cheol-Hwan Kim, Jong-Hwa Yun, Jin-ho Choi*, Jin-Hwe Kweon*. "Strength Evaluation of the Mechanically Bolted Joint".

    ISMAI-08

    . 2013.
  • 7. Sung-jun Park, Rene Roy, Jin-Hwe Kweon*, Jin-ho Choi*. "Mechanical Properties of Nomex Honeycomb and its Constituents".

    ISMAI-08

    . 2013.
  • 8. Myung-Gyun Ko, Han-Gi Son, Yong-Bin, Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Fatigue Performance of Transversely Reinforced Composite Single-Lap Joints in Harsh Environmental Conditions".

    ISMAI-08

    . 2013.
  • 9. Dong-Gwan Kim, Hun Ji, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Static Characteristics of Composite Hat-joints Reinforced by Stainless Steel Pins".

    ISMAI-08

    . 2013.
  • 10. Yong-Bin Park, Gun-Ah Yu, Min-Hwan, Song, Jin-Hwe Kweon*, Jin-ho Choi*. "The Effect of Porosity Rate on the Monotonic and Cyclic Properties of Carbon-epoxy Composite Laminate with a Hole".

    ICCS 17

    . 2013.
  • 11. Rene Roy, Han-Gi Son, Jin-Hwe Kweon*, Jin-ho Choi*. "Nomex® Honeycomb Constituent Material Mechanical Properties Characterization".

    ICCS 17

    . 2013.
  • 12. Min-Hyo Kang, Jin-ho Choi*, Jin-Hwe Kweon*. "Fatigue life evaluation and crack detection of the adhesive joint with carbon nano tube".

    ICCS 17

    . 2013.
  • 13. Hun Ji, Yong-Bin Park, Sang-Uk Yun, Jin-Hwe Kweon*, Jin-ho Choi*. "Static and Fatigue Characteristics of Stainless Steel Pin-Reinforrced Composite Panels with Hat-Shaped Stiffener".

    ICCS 17

    . 2013.
  • 14. Jong-Hwa Yun, Jin-ho Choi*, Jin-Hwe Kweon*. "A Study on the Strength Improvement of the Multi-Bloted Joint".

    ICCS 17

    . 2013.
  • 15. Han-Gi Son, Byeong-Hee Lee, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*, and Ik-Hyeon Choi. "Fatigue Behavior of metal Pin-Reinforced Composite Single-Lap Joints in Hygrothermal Environment".

    ICCS 17

    . 2013.
  • 16. Cheol-Hwan Kim, Kang-woo Jeong, Jin-ho Choi*, Jin-Hwe Kweon*. "Crack Detection of Composite Shell using FBG Sensor".

    ISMAI-07

    . 2013.
  • 17. Hun Ji, Yong-Bin Park, Gyeong-Chan Lee, Jin-Hwe Kweon*, Jin-ho Choi*. "Mechanical Characteristics of Carbon/BMI-Nomex Sandwich Joints in Harsh Environmental Conditions".

    ISMAI-07

    . 2013.
  • 18. Gun-Ah Yu, Gyeong-Chan Lee, Jin-Hwe Kweon*, Jin-ho Choi*. "Optimization of Buckling and Failure Loads on the Sandwich Composite Cylinders under External Hydrostatic Pressure".

    ISMAI-07

    . 2013.
  • 19. Han-Gi Son, Deepak Kumar, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Structural Design and Analysis of Composite Aircraft Fuselage Used to Develop AFP Technology".

    ISMAI-07

    . 2013.
  • 20. Sung-Jun Park, Yong-Bin Park, Byeong-Hee Lee, Jin-Hwe Kweon*, Jin-ho Choi*. "Failure of Composite Single-lap Bonded Joints Reinforced by Metal Pins".

    ISMAI-07

    . 2013.

In 2012

  • 1. H.Ji, Y.B. Park, G.C. Lee, J.H. Kweon**, J.H. Choi*. "Environmental Effects on the Strength of Carbon/BMI-Nomex Sandwich Joints under Pull-out and Bearing Loads".

    ACCM 08

    . 2012.
  • 2. J.H. Yun, K.W. Jeong, J.H. Choi*, J.H. Kweon**. "Strength Evaluation of Bolt Joint with Hole Clearance".

    ACCM 08

    . 2012.
  • 3. G.A. Yu, G.C. Lee, J.H. Kweon**, J.H. Choi*, Y.S. Cho. "Optimal Design of Buckling and Failure Loads of Sandwich Composite Cylinders for Underwater Vehicles".

    ACCM 08

    . 2012.
  • 4. H.G. Son, B.H. Lee, Y.B. Park, J.H. Kweon**, J.H. Choi*. "Fatigue Behavior of Composite Single-lap Joints with Through-Thickness Reinforcement by Stainless Steel Pins".

    ACCM 08

    . 2012.
  • 5. Y.B. Park, B.H. Lee, D. Kumar, J.H. Kweon**, J.H. Choi*. "Failure Characteristics of Pin-reinforced Composite Single-lap Bonded Joint in Various Temperature Conditions".

    ACCM 08

    . 2012.
  • 6. R. Roy, J.H. Kweon**, J.H. Choi*. "Failure Criteria Analysis for Meso-Scale Finite Element Modeling of Nomex Honeycomb Sandwich Panels".

    ACCM 08

    . 2012.
  • 7. K.H. Nguyen, J.H. Kweon**, J.H. Choi*. "A Study on the High Velocity Impact Behaviors of Nomex Sandwich Panels".

    ACCM 08

    . 2012.
  • 8. Jin-ho Choi*, M.H.Kang, J.H.Kweon*. "Crack Detection of Composite Shell under Lateral Loading using FBG Sensor".

    ACCM 08

    . 2012.
  • 9. J.H.Choi*, H.Ji, Y.B.Park, G.C.Lee, J.H.Kweon*. "Environmental Effects on the Strength of Carbon/BMI-Nomex Sandwich Joints under Pull-out and Bearing Loads".

    ACCM 08

    . 2012.
  • 10. J.H.Choi*, Y.B.Park, B.H.Lee, D.Kumar, J.H.Kweon*. "Failure Characteristics of Pin-reinforced Composite Single-lap Bonded Joint in Various Temperature Conditions".

    ACCM 08

    . 2012.
  • 11. Jin-ho Choi*, R.Roy, J.H.Kweon*. "Failure Criteria Analysis for Meso-Scale Finite Element Modeling of Nomex Honeycomb Sandwich Panels".

    ACCM 08

    . 2012.
  • 12. H.G.Son, B.H.Lee, Y.B.Park, J.H.Kweon* and Jin-ho Choi*. "Fatigue Behavior of Composite Single-lap Joints with Through-Thickness Reinforcement by Stainless Steel Pins".

    ACCM 08

    . 2012.
  • 13. J.H.Choi*, G.A.Yu, G.C.Lee, J.H.Kweon*, J.H.Choi*, Y.S.Cho. "Optimal Design of Buckling and Failure Loads of Sandwich Composite Cylinders for Underwater Vehicles".

    ACCM 08

    . 2012.
  • 14. J.H.Yun, K.W.Jeong, J.H.Choi*, J.H.Kweon*. "Strength Evaluation of Bolt Joint with Hole Clearance".

    ACCM 08

    . 2012.
  • 15. Rene Roy, Jin-Hwe Kweon*, Jin-ho Choi*. "Finite Element Modeling of Nomex Honeycomb Sandwich Panels with bolt inserts".

    ISAT 12

    . 2012.
  • 16. Deepak Kumar, J.H. Kweon**, R.Roy Mahapatra. "FEM Simulation of Thermosonic Wave Interaction with Crack in Metallic Structure".

    ISAT 12

    . 2012.
  • 17. K.H. Nguyen, Y.B. Park, J.H. Kweon**, J.H. Choi*. "Analysis of composite sandwich T-joints under Pull-off Loading".

    ISAT 12

    . 2012.
  • 18. Jin-ho Choi*, Rene Roy, Jin-Hwe Kweon*. "Finite Element Modeling of Nomex Honeycomb Sandwich Panels with bolt inserts".

    Proceedings of the 12th International Symposium on Aerospace Technology

    . 2012.
  • 19. Rene Roy, Jin-Hwe Kweon*, Jin-ho Choi*. "Meso-Scale Finite Element Modeling Techniques for Nomex Honeycomb Sandwich Panels".

    ASHMCS 2012

    . 2012.
  • 20. K.H. Nguyen, Y.B. Park, J.H. Kweon**, J.H. Choi*. "Failure Analysis of sandwich T-joints under Pull-off Loading".

    ASHMCS 2012

    . 2012.
  • 21. Min-Hyo Kang, Jin-ho Choi*, Jin-Hwe Kweon*. "Comparisons of FBG and AE Sensors for the Composite Crack Detection".

    ASHMCS 2012

    . 2012.
  • 22. J.H.Choi*, K.H.Nguyen, Y.B.Park, J.H.Kweon*. "Failure Analysis of sandwich T-joints under Pull-off Loading".

    ASHMCS 2012

    . 2012.
  • 23. Jin-Ha Park, Jin-ho Choi*, Jin-Hwe Kweon*. "Fatigue Life Evaluation and Crack Detection of an Adhesive Joint with a Carbon nano tube".

    International Conference on Mechanics of Nano and Macro Composite Structures

    . 2012.
  • 24. Byeong-Hee Lee, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Fatigue Behavior of Stainless pin-reinforced Composite Cocured Joints".

    International Conference on Mechanics of Nano and Macro Composite Structures

    . 2012.
  • 25. Gyeong-Chan Lee, Ji-Seon Kim, Jin-Hwe Kweon*, Jin-ho Choi*. "Optimization of Sandwich Composite Cylinders for Underwater Vehicle Application".

    International Conference on Mechanics of Nano and Macro Composite Structures

    . 2012.
  • 26. Khanh-Hung Nguyen, Jin-Hwe Kweon*, Jin-ho Choi*. "Failure Analysis of Nomex Sandwich Panels Under High Velocity Impact".

    International Conference on Mechanics of Nano and Macro Composite Structures

    . 2012.
  • 27. Yong-Bin Park, Byeong-Hee Lee, Jin-Hwe Kweon*, Jin-ho Choi*. "Effect of Through-Thickness Reinforcement on the Strength of Composite Single-lap Joints".

    International Conference on Mechanics of Nano and Macro Composite Structures

    . 2012.
  • 28. Yong-Bin Park, Sang-Uk Yun, Gyeong-Chan Lee, Jin-Hwe Kweon*, Jin-ho Choi*. "Hygrothermal Effects on the Strengths of Carbon/BMI-NOMEX Sandwich Joints".

    International Conference on Mechanics of Nano and Macro Composite Structures

    . 2012.
  • 29. Hun Ji, Yong-Bin Park, Gyeong-Chan Lee, Jin-Hwe Kweon*, Jin-ho Choi*. "Effect of Environmental Conditions on the Failure of Carbon/BMI Composite Sandwich Joints".

    ICAAT 2012

    . 2012.
  • 30. Jong-Hwa Yun, Kang-Woo Jeong, Jin-Hwe Kweon*, Jin-ho Choi*. "A Study on Strength of Machined Composite Double-lap Joint".

    ICAAT 2012

    . 2012.
  • 31. Gun-Ah Yu, Gyeong-Chan Lee, Jin-Hwe Kweon*, Jin-ho Choi*. "Optimal Design of Sandwich Composite Cylinders for Underwater Application".

    ICAAT 2012

    . 2012.
  • 32. Han-Gi Son, Byeong-Hee Lee, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Mechanical Behavior of Transversely Reinforced Composite Single-lap Joints by Stainless Steel Pins".

    ICAAT 2012

    . 2012.
  • 33. Min-Hyo Kang, Jin-Ha Park, Jin-ho Choi*, Jin-Hwe Kweon*. "Crack Detection of Composite Cylinders under lateral loading using the FBG and PVDF sensor".

    ICAAT 2012

    . 2012.
  • 34. Deepak kumar, Naresh Chandra Murmu. "Design Development of Micro Linear stage for 5-axis Micro Milling Machine".

    ICAAT 2012

    . 2012.
  • 35. Rene Roy, Jin-Hwe Kweon*, Jin-ho Choi*. "Buckling failure criterion for Nomex honeycomb sandwich structure bolt insert allowable pull-out load".

    ICAAT 2012

    . 2012.
  • 36. Kang-Woo Jeong, Jin-Ha Park, Jin-Ho-Choi*, Jin-Hwe Kweon*. "Composite material double-lap joints".

    ISMAI-06

    . 2012.
  • 37. Byeong-Hee Lee, Mun-Gyu Jeong, Sang-Uk Yoon, Jin-Hwe Kweon*, Jin-ho Choi*. "Shear properties of glass/epoxy composite laminate in different manufacturing environments".

    ISMAI-06

    . 2012.
  • 38. Gyeong-Chan Lee, Ji-Seon Kim, Jin-Hwe Kweon*, Jin-ho Choi*. "A study on optimization of composite stiffened cylinder under external hydraulic pressure".

    ISMAI-06

    . 2012.
  • 39. Sang-Uk Yoon, Mun-Gyu Jeong, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "An experimental study on the tensile strength of composite laminates with different repair types".

    ISMAI-06

    . 2012.
  • 40. Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Effect of Joining Methods on Failure Behavior of Aluminum Sandwich Joints under Pull-out Loading".

    ISMAI-06

    . 2012.
  • 41. Yong-Bin Park, Byeong-Hee Lee, Jin-Hwe Kweon*, Jin-ho Choi*. "A parametric study on strength ofz-pinned composite bonded joints".

    ISMAI-06

    . 2012.
  • 42. Khanh-Hung Nguyen, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Failure of foam-based sandwich joints under pull-out loading".

    ISMAI-06

    . 2012.
  • 43. Jin-ho Choi*, Kang-Woo Jeong, Jin-Ha Park, Jin-Hwe Kweon*. "Composite material double-lap joints".

    ISMAI-06

    . 2012.

In 2011

  • 1. S.U. Yun, M.G. Jeong, Y.B. Park, J.H. Kweon**, J.H. Choi*. "Tensile Strength of Composite Laminates after Various Types of Repair".

    ISMST 2011

    . 2011.
  • 2. DaeKeon Ahn, Jin-Hwe Kweon*, Jin-ho Choi*. "Characterization of Surface Roughness and Analysis of Process Value in Stereolithography".

    ISMST 2011

    . 2011.
  • 3. Y.B. Park, J.H. Kweon**, J.H. Choi*. "An Experimental Study on the Strength of Aluminum Honeycomb Sandwich Joints under Pull-out Loading".

    ISMST 2011

    . 2011.
  • 4. Rene Roy, Khanh-Hung Nguyen, Jin-Hwe Kweon*, Chang-Won Shul. "Finite Element Modeling of Nomex® Honeycomb Core CarbonEpoxy Composite Sandwich Panels".

    ISMST 2011

    . 2011.
  • 5. G.C. Lee, J.S. Kim, J.H. Kweon**, J.H. Choi*. "Optimal Design of Composite Stiffened Cylinder Subject to External Hydrostatic Pressure".

    ISMST 2011

    . 2011.
  • 6. B.H. Lee, M.G. Jeong, S.U. Yun, J.H. Kweon**, J.H. Choi*. "Effect of Manufacturing Environments on the Shear properties of GlassEpoxy Composite Laminate".

    ISMST 2011

    . 2011.
  • 7. Jin-ho Choi*, Byeong-Hee Lee, Yong-Bin Park, Jin-Hwe Kweon*, Ik-Hyeon Choi. "Carbon pin-reinforced composite T-joints undere pull-off loading".

    Proc.of the 11th Int. Symp. on Aerospace Technology

    . 2011.
  • 8. Rene Roy, Jin-Hwe Kweon*, Jin-ho Choi*, Chang-Won Shul. "Nomex Honeycomb Core Material Property Data".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2011.
  • 9. Khanh-Hung Nguyen, Jin-Hwe Kweon*, Jin-ho Choi*, Chang-Won Shul. "Finite element analysis of Nomex honeycomb sandwich joints under pull-out loading".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2011.
  • 10. Kang-Woo Chung, Yong-Bin Park, Jin-ho Choi*, Jin-Hwe Kweon*. "A study on failure strength of composite key joint".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2011.
  • 11. Kang-Woo Jeong, Jin-Ha Park, Jin-Hwe Kweon*. "Strength of hat-shaped composite structures".

    Proc.of the 11th Int. Symp. on Aerospace Technology

    . 2011.
  • 12. Byeong-Hee Lee, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*, Ik-Hyeon Choi. "Carbon pin-reinforced composite T-joints undere pull-off loading".

    ISAT 11

    . 2011.
  • 13. Kang-Woo Jeong, Jin-Ha Park, Jin-ho Choi*, Jin-Hwe Kweon*. "Strength of hat-shaped composite structures".

    ISAT 11

    . 2011.
  • 14. Y. B. Park, J. H. Kweon*, J. H. Choi*. "Strength of composite sandwich joints under hygrothermal condition".

    ICCM 18

    . 2011.
  • 15. Jin-Ha Park, Kang-Woo Jeong, Jin-ho Choi* and Jin-Hwe Kweon*. "A study on failure strength evaluation of hybrid composite joint".

    ICCM 18

    . 2011.
  • 16. J. S. Kim, J. H. Kweon*, J.H. Choi*. "Optimization of a stiffened composite cylinder under external hydrostatic pressure for underwater vehicles".

    ICCM 18

    . 2011.
  • 17. K.H. Nguyen, J.H. Kweon**, J.H. Choi*. "A parametric study of the impact behavior of a honeycomb sandwich structure".

    ICCM 18

    . 2011.
  • 18. Jin-ho Choi*, Kang-Woo Jeong, Jin-Ha Park, Jin-Hwe Kweon*. "A study on the failure mechanism and strength evaluation of the mechanical key joint".

    ICCS 16

    . 2011.
  • 19. Jin-ho Choi*, Ji-Seon Kim, Chul-Jin Moon, Jin-Hwe Kweon*, Jong-Rae Cho, Sang-Rae Cho, Yoon-Sik Cho. "Buckling behavior of composite sandwich cylinders subjected to hydrostatic pressure".

    ICCS 16

    . 2011.
  • 20. Jin-ho Choi*, Khanh-Hung Nguyen, Yong-Bin Park, Jin-Hwe Kweon*. "Failure behavior of foam-based sandwich joints under pull-out and bearing tests".

    ICCS 16

    . 2011.
  • 21. Jin-ho Choi*, Yong-Bin Park, In-Hun Kim, Ik-Hyeon Choi, Jin-Hwe Kweon*. "Mechanical behavior of z-pinned composite laminates using carbon fibers".

    ICCS 16

    . 2011.
  • 22. Mun-Gyu Jeong, Hyeon-Jeong Yang, Jin-Hwe Kweon*. "Strength of carbon-epoxy bonded joints with various moisture contents and environments".

    ICCS 16

    . 2011.
  • 23. Yong-Bin Park, In-Hun Kim, Bae-Hyun Choi, Ik-Hyeon Choi, Jin-Hwe Kweon*. "Strength of composite bonded joints transversely reinforced by carbon pins".

    ICCS 16

    . 2011.
  • 24. Yong-Bin Park, In-Hun Kim, Bae-Hyun Choi, Ik-Hyeon Choi, Jin-Hwe Kweon*, Jin-ho Choi*. "Strength of composite bonded joints transversely reinforced by carbon pins".

    ICCS 16

    . 2011.
  • 25. Yong-Bin Park, In-Hun Kim, Ik-Hyeon Choi, Jin-Hwe Kweon*, Jin-ho Choi*. "Mechanical behavior of z-pinned composite laminates using carbon fibers".

    ICCS 16

    . 2011.
  • 26. Khanh-Hung Nguyen, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "Failure behavior of foam-based sandwich joints under pull-out and bearing tests".

    ICCS 16

    . 2011.
  • 27. Ji-Seon Kim, Chul-Jin Moon, Jin-Hwe Kweon*, Jin-ho Choi*, Jong-Rae Cho, Sang-Rae Cho, Yoon-Sik Cho. "Buckling behavior of composite sandwich cylinders subjected to hydrostatic pressure".

    ICCS 16

    . 2011.
  • 28. Mun-Gyu Jeong, Hyeon-Jeong Yang, Jin-Hwe Kweon*, Jin-ho Choi*. "Strength of carbon-epoxy bonded joints with various moisture contents and environments".

    ICCS 16

    . 2011.
  • 29. Kang-Woo Jeong, Jin-Ha Park, Jin-ho Choi*, Jin-Hwe Kweon*. "A study on the failure mechanism and strength evaluation of the mechanical key joint".

    ICCS 16

    . 2011.
  • 30. Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "An experimental study on failure behaviors of composite sandwich joints".

    ISMAI 2011

    . 2011.
  • 31. Khanh-Hung Nguyen, Mun-Gyu Jeong, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "A numerical study on mechanical properties of honeycomb core".

    ISMAI 2011

    . 2011.
  • 32. Mun-Gyu Jeong, Hyeon-Jeong Yang, Jin-Hwe Kweon*, Jin-ho Choi*. "Effect of salt water uptake on the strength of composite single-lap joints".

    ISMAI 2011

    . 2011.
  • 33. Ji-Sun Kim, Chul-Jin Moon, Jin-Hwe Kweon*, Jin-ho Choi*. "Optimization of filament wound composite cylinder under the hydrostatic pressure using micro-genetic algorithm".

    ISMAI 2011

    . 2011.

In 2010

  • 1. Hyeon-Jeong Yang, Mun-Gyu Jeong, Bae-Hyun Choi, Jin-Hwe Kweon*, Jin-ho Choi*. "Evaluation of Strength of Composite Single-lap Bonded Joint Exposed to Hot Water Environment".

    ACCM 07

    . 2010.
  • 2. Jin-Ha Park, Ceon-Hui Kim, Jin-ho Choi*, Jin-Hwe Kweon*. "Crack Detection of Filament Wound Composite Cylinders using the Acoustic Emission".

    ACCM 07

    . 2010.
  • 3. Yong-Bin Park, In-Hun Kim, Jin-Hwe Kweon*, Jin-ho Choi*, Hyun-Il Cho. "Experimental Determination of Design Allowable for Composite Sandwich Joints".

    ACCM 07

    . 2010.
  • 4. Khanh-Hung Nguyen, Ngoc-Trung Nguyen, Yong-Bin Park, Jin-Hwe Kweon*. "A Study on Impact Behavior of Composites Reinforced by Randomly Distributed Spherical Particles".

    ACCM 07

    . 2010.
  • 5. Ji-Seon Kim, Chul-Jin Moon, Jin-Hwe Kweon*, Jin-ho Choi*, Jong-Rae Cho, Sang-Rae Cho, Yoon-Sik Cho. "Stacking Sequence Optimization of Filament Wound Composite Cylinder using Micro-Genetic Algorithm for Underwater Applications".

    ACCM 07

    . 2010.
  • 6. Mnu-Gyu Jeong, Hyeon-Jeong Yang, Jin-Hwe Kweon* and Jin-ho Choi*. "The Effect of Tap Water Environment to the Strength of Composite Single-lap Joint".

    ISAT 07

    . 2010.
  • 7. Dae-Keon Ahn, Jin-Hwe Kweon*, Jeok-Hee Lee. "Prediction of surface roughness in fused deposition modeling".

    ICAAT 2010

    . 2010.
  • 8. Hyeon-Jeong Yang, Mun-Gyu Jeong, Jin-Hwe Kweon*, Jin-ho Choi*. "The evaluation of strength of composite single lap bonded joint exposed to fresh water environment".

    ICAAT 2010

    . 2010.
  • 9. Bae-Hyun Choi, Khanh-Hung Nguyen, Jin-Hwe Kweon*, Jin-ho Choi*. "Investigation on failure mode and strength of sandwich-to-laminate single-lap bonded joints".

    ICAAT 2010

    . 2010.
  • 10. In-Hun Kim, Yong-Bin Park, Jin-Hwe Kweon*, Jin-ho Choi*. "The experimental test on T-joint strength for aircraft wing structures".

    ICAAT 2010

    . 2010.
  • 11. Ngoc-Trung Nguyen, Jin-Hwe Kweon*. "A homogenization-based approach to characterize the mechanical properties of composite materials".

    ICAAT 2010

    . 2010.
  • 12. Jin-Hwe Kweon*, Yong-Bin Park, Jin-ho Choi*. "Design allowables for composite bonded joints in aircraft structures".

    UKC 2010

    . 2010.

In 2009

  • 1. Ngoc-Trung Nguyen, Jin-Hwe Kweon*. "A study on homogenization of composites using the trigonometric interpolation and the Fourier transforms".

    APCATS'2009

    . 2009.
  • 2. Daekeon Ahn, Jin-Hwe Kweon*, Seok-Hee Lee. "Relation between surface roughness and overlap interval 0n fused deposition modelin".

    AMPT 2009

    . 2009.
  • 3. Jin Ho Choi*. "Strength Prediction of Composite Pin-Loaded Joint Using the FAI Method".

    The 4th NorthWest US-Korea Conference on BNCIT Systems Technology

    . 2009.
  • 4. Jin-ho Choi*, Kiwon Park, Myung-Keun Yoon, Jinho Choi*, James Sears, Mano Thubrikar. "Mechanisms of Electrode Degradation on Ionic Polymer-Metal Composite(IPMC) Sensors".

    BMES 2009 Annual Fall Scientific Meeting

    . 2009.
  • 5. Bae-Hyun Choi, Min-Gyu Song, Jin-Hwe Kweon* and Jin-ho Choi*. "A study on the effect of manufacturing methods to the shear strength of composite single-lap bonded joints".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2009.
  • 6. Hyeon-Jeong Yang, Min-Gyu Song, Jin-Hwe Kweon* and Jin-ho Choi*. "An experimental study of composite single-lap bonded joints in various environmental conditions".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2009.
  • 7. In-Hoon Kim, Chul-Jin Moon, Jin-Hwe Kweon* and Jin-ho Choi*. "Postbuckling analysis of composite cylindrical shells under hydrostatic pressure for underwater vehicle".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2009.
  • 8. Geon-Hui Kim, Jae-Hyun Park, Jin-ho Choi* and Jin-Hwe Kweon*. "A study on manufacture and experimental investigation of the reinforced composite panel".

    ISMAI-04

    . 2009.
  • 9. Hyeon-Jeong Yang, Min-Gyu Song and Jin-Hwe Kweon*. "Investigation of environmental effects on the strength of composite single-lap bonded joints".

    ISMAI-04

    . 2009.
  • 10. Bae-Hyun Choi, Min-Gyu Song and Jin-Hwe Kweon*. "Shear strength of composite single-lap joints with various bonding methods".

    ISMAI-04

    . 2009.
  • 11. Young-Hwan Lee, Do-Wan Lim, Jin-ho Choi*, Jin-Hwe Kweon*, Myung-Gun Yoon. "The failure load prediction of a hybrid joint using the damage zone theory and failure area index method".

    ICCS 15

    . 2009.
  • 12. Jae-Hyun Park, Jin-ho Choi* and Jin-Hwe Kweon*. "The strength evaluations of thick aluminum-to-aluminum joints with different adhesive length and thickness".

    ICCS 15

    . 2009.
  • 13. Geon-Hui Kim, Jin-ho Choi* and Jin-Hwe Kweon*. "Manufacture and performance evaluation of the composite hat-stiffened panel".

    ICCS 15

    . 2009.
  • 14. Jeoung-Hee Ahn, Khanh-Hubg Nguyen, Yong-Bin Park, Jin-Hwe Kweon* and Jin-ho Choi*. "A numerical study on the high velocity impact response of a composite laminate using LS-DYNA".

    ICCS 15

    . 2009.
  • 15. Chul-Jin Moon, In-Hoon Kim, Bae-Hyeon Choi, Jin-Hwe Kweon* and Jin-ho Choi*. "Buckling of filament wound composite cylinders subjected to hydrostatic pressure for underwater vehicle application".

    ICCS 15

    . 2009.
  • 16. Joong-Jin Kim, Hyeon-Jeong Yang, Jin-Hwe Kweon* and Jong-Su Han. "Structural analysis of composite target-drone wing".

    ICCS 15

    . 2009.
  • 17. Min-Gyu Song, Jin-Hwe Kweon*, Jin-ho Choi*, Min-Hwan Song, Sang-Joon Shin and Tae-Joo Lee. "Effect of manufacturing methods on the shear strength of commposite single-lapbonded joints".

    ICCS 15

    . 2009.
  • 18. Khanh-Hung Nguyen, Jeoung-Hee Ahn, Yong-Bin Park, Jin-Hwe Kweon* and Jin-ho Choi*. "Optimization of composite laminate subjected to high velocity impact using a genetic algorithm".

    ICCS 15

    . 2009.
  • 19. Joong-Jin Kim, Yong-Bin Park, Jin-Hwe Kweon* and Jin-ho Choi*. "Strength of carbon/epoxy composite single-lap bonded joints in various environmental conditions".

    ICCS 15

    . 2009.
  • 20. Jin-ho Choi*, Chul-Jin Moon, Jin-Hwe Kweon*. "buckling of Filament Wound Carbon-Epoxy Cylinders for Underwater Vehicle Application".

    ISMAI-3 2009

    . 2009.
  • 21. Do-Wan Lim, Jae-Hyun Park and Jin-Hwe Kweon*. "The Strength Evaluation of The Adhesively Bonded Joint with Different Adhesive Length and Thickness".

    ISMAI-3 2009

    . 2009.

In 2008

  • 1. Khanh-Hung Nguyen, Jin-Hwe Kweon* and Jin-ho Choi*. "A study on the failure load prediction by damage zone method for single-lap bonded joints with dissimilar adherends".

    Symposium on Aerospace Engineering

    . 2008.
  • 2. Myeong-Su Seong, Min-Gyu Song, Jin-Hwe Kweon* and Jin-ho Choi*. "An experimental study on the strength of single lap bonded joints of carbon composite and aluminum".

    ICCE-16

    . 2008.
  • 3. Keun-Il Song, Yong-Bin Park, Jin-Hwe Kweon* and Jin-ho Choi*. "An experimental study on the insert joint strength of sandwich structures under pull-out loading".

    ICCE-16

    . 2008.
  • 4. Seong-Hwa Hur, Joong-Jin Kim, Jin-Hwe Kweon* and Jin-ho Choi*. "Postbuckling analysis of filament wound composite cylinders under external hydrostatic pressure".

    ICCE-16

    . 2008.
  • 5. Khanh-Hung and Jin-Hwe Kweon*. "A study on failure load prediction of single lap bonded joint of carbon composite and aluminum".

    ICCE-16

    . 2008.
  • 6. Geon-Hui KIm, Do-Wan Lim, Jin-ho Choi* and Jin-Hwe Kweon*. "A study of the strength of carbon-carbon brake disk for automotive use".

    ICCE-16

    . 2008.
  • 7. Jae-Hyun Park, Chang-Su Ban, Jin-ho Choi* and Jin-Hwe Kweon*. "The failure load prediction of adhesive joints using the modified damage zone theory".

    ICCE-16

    . 2008.
  • 8. Fen-Fang Zheng, Do-Wan Lim, Jin-ho Choi* and Jin-Hwe Kweon*. "A study on ultrasonic pulse-echo characteristic of composite material".

    ICCE-16

    . 2008.
  • 9. Khanh-Hung Nguyen, Jin-Hwe Kweon* and Jin-ho Choi*. "A study on the failure load prediction of single lap bonded joints with dissimilar adherends".

    High Performance Aircraft Core Parts Design

    . 2008.
  • 10. Seong-Hwa Hur, Myeong-Su Seong, Jin-Hwe Kweon* and Jin-ho Choi*. "Postbuckling of filament wound composite cylinders under external hydrostatic pressure".

    High Performance Aircraft Core Parts Design

    . 2008.
  • 11. Sun-Chul Huh, Jin-ho Choi* and Jin-Hwe Kweon*. "The study on fatigue lifetime evaluation on the interconnect of diaphragm type pressure sensor".

    High Performance Aircraft Core Parts Design

    . 2008.
  • 12. Zheng Fen Fang, Jin-ho Choi* and Jin-Hwe Kweon*. "A study on ultrasonic pulse-echo characteristic of composite material".

    High Performance Aircraft Core Parts Design

    . 2008.
  • 13. Min Hwan Song, Jin-Hwe Kweon*, Sang-Kuk Kim, Cheol Kim, Tae-Joo Lee, Sang-Min Choi and Myeong-Su Seong. "An experimental study on the failure of carbon/epoxy single lap rivetted joints after thermal exposure".

    High Performance Aircraft Core Parts Design

    . 2008.
  • 14. Jin-Hwe Kweon*, Keun-Il Song and Jin-ho Choi*. "Finite element analysis on the failure of the composite/honeycomb sandwich insert oints under pull-out loading".

    ICCES-08

    . 2008.
  • 15. Chul-Jin Moon, Jin-Hwe Kweon* and Jin-ho Choi*. "Buckling of Filament Wound Carbon-Epoxy Cylinders for Underwater Vehicle Application".

    ISMAI-03

    . 2008.
  • 16. Do-Wan Lim, Jin-ho Choi* and Jin-Hwe Kweon*. "The strength evaluation of the Adhesively Bonded Joint with Different Adhesive Length and Thickness".

    ISMAEI-03

    . 2008.
  • 17. Min-Gyu Song, Jin-Hwe Kweon* and Kyung-Su Kim. "A Parametric Study on the Mechanical Properties of Single-Lap Bonded Joints with Various Surface Treatment Methods".

    ISMAI-03

    . 2008.

In 2007

  • 1. Do-Wan Lim, Tae-Hwan Kim, Jin-ho Choi*, Jin-Hwe Kweon* and Hong-Sik Park. "A Study on the Strength of Carbon-Carbon Brake Disk for Automotive".

    ICCS-14

    . 2007.
  • 2. Chang-Su Ban, Young-Hwan Lee, Jin-ho Choi* and Jin-Hwe Kweon*. "Strength Prediction of the Adhesive Joint using the Modified Damage Zone Theory".

    ICCS-14

    . 2007.
  • 3. Min-Hwan Song, Jin-Hwe Kweon*, Sang-Kuk Kim, Cheol Kim, Tae-Joo Lee, Sang-Min Choi and Myeong-Su Seong. "An experimental study on the failure of carbon/epoxy single lap riveted joints after thermal exposure".

    ICCS-14

    . 2007.
  • 4. Keun-Il Song, Ji-Young Choi, Jin-Hwe Kweon*, Jin-ho Choi* and Kwang-Soo Kim. "An Experimental Study on the Failure Loads of Composite Sandwich Insert Joints".

    ICCS-14

    . 2007.
  • 5. Seong-Hwa Hur, Hee-Jin Son, Jin-Hwe Kweon* and Jin-ho Choi*. "Post buckling of Composite Cylinders under External Hydrostatic Pressure".

    ICCS-14

    . 2007.
  • 6. Myeong-Su Seong, Tae-Hwan Kim, Khanh-Hung Nguyen, Jin-Hwe Kweon* and Jin-ho Choi*. "A Parametric Study on the Failure of Bonded Single-Lap Joints of Carbon Composite and Aluminum".

    ICCS-14

    . 2007.
  • 7. Jin-Hwe Kweon*, Myeong-Su Seong, Jin-ho Choi*. "Strength of Composite and Aluminium Dissimilar Materials Bonded Joints".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2007.
  • 8. Tae-Hwan Kim, Keun-Il Song, Kahn Hung Nguyen, Jin-Hwe Kweon* and Jin-ho Choi*. "An Experimental Study on the Failure and Strength of Composite-to-Aluminum Single-Lap Bonded Joints".

    ATEM 2007

    . 2007.
  • 9. Chang-Su Ban, Young-Hwan Lee, Jin-ho Choi*, Jin-Hwe Kweon*. "Failure Load Prediction of Adhesive Joints Using the Damage Zone Method".

    ISMAI-2 2007

    . 2007.
  • 10. Do-Wan Lim, Tae-Hwan Kim, Jin-ho Choi*, Jin-Hwe Kweon*. "Strenght Prediction of Composite Brake Disk for Automotive".

    ISMAI-2 2007

    . 2007.
  • 11. Jin-Hwe Kweon*, Tae-Hwan Kim, Jin-ho Choi*. "Failure characteristics of composite-to-aluuminu bonded joints".

    Aerospace Science and Technology(AST)

    . 2007.
  • 12. Jin-ho Choi*, Do-Wan Lim,Chang-Su Ban and J.H. Kweon**. "Strength Prediction of the Mechanically Fasetned Composite Joint Using the FAI Method".

    UKC 2007

    . 2007.
  • 13. J.H. Kweon*, T.H. Kim and J.H. Choi*. "Failure Characteristics of Composite-to-Aluminum Bonded Joints".

    UKC 2007

    . 2007.
  • 14. J.Y. Choi, T.H. Kim and J.H. Kweon**. "A Progressive Failure Approach for Composite Pin Joints".

    ISMAI 2007

    . 2007.
  • 15. H.J. Son and J.H. Kweon**. "Crippling Characteristics of CFRP Stringer".

    ISMAI 2007

    . 2007.

In 2006

  • 1. D.H. Kim, S.W. Oh, I. Lee, J.H. Kweon* and J.H. Choi*. "Weight Optimization of Composite Flat and Curved Wings Satisfying Both Flutter and Divergence Constraints".

    ACCM-5

    . 2006.
  • 2. J.H. Kweon*, H.J. Son, J.Y. Choi, S.Y. Shin, J.H. Choi* and G.M. Lee. "Progressive Failure Analysis of Unidirectional-Fabric Laminated Composite Joints under Pin-Loading".

    ACCM-5

    . 2006.
  • 3. J.H. Choi*, Y.H. Lee, J.H. Kweon*. "Strength of Composite Laminated Pin-Loaded Joint without the Clamping Force".

    APCATS'2006

    . 2006.
  • 4. J.H. Kweon* and J.H. Choi*. "Strength Analysis of Carbon-Epoxy Composite Joints under Pin Loading".

    APCATS'2006

    . 2006.
  • 5. H.J. Son, J.H. Kweon* and J.H. Choi*. "Progressive Failure and Strength Analysis of Composite Stringers under Compression".

    The International Symposium on AerospaceTechnology

    . 2006.
  • 6. T.H. Kim, J.Y. Choi, J.H. Kweon** and J.H. Choi*. "Progressive Failure Analysis of Pinned Joints in Combined Unidirectional-Fabric Laminated Composites".

    The International Symposium on AerospaceTechnology

    . 2006.
  • 7. Y.H. Lee, J.H. Choi* and J.H. Kweon*. "Detection of the Acoustic Wave Using a Piezo Planar Array".

    The International Symposium on AerospaceTechnology

    . 2006.
  • 8. J.H. Choi*, Y. H. Lee, J.H. Kweon** and W.S. Che. "Strength of Composite Laminated Bolted Joint Subjected to a Clamping Force".

    ICEM 2006

    . 2006.
  • 9. J.H. Kweon*, S.M. Choi, H.J. Son, J.Y. Choi, J.H. Choi* and W. S. Che. "Experimental and Finite Element Characterization of the Crippling Failure of Composite Stiffeners".

    ICEM 2006

    . 2006.
  • 10. Jin-Hwe Kweon*, Sang-min Choi, Hee-Jin Son, Ji-Young Choi, Jin-ho Choi*, Woo-Sung Jae. "Experimental and Finite Element Characterization of the Crippling Failure of Composite Stiffeners".

    ICEM 2006

    . 2006.
  • 11. Jin-ho Choi*, Young-Hwan Lee, Jin-Hwe Kweon*, Woo-Sung Jae. "Strength of Composite Laminated Bolted Joint Subjected to a Clamping Force".

    ICEM 2006

    . 2006.
  • 12. J.H. Kweon*, G.M. Lee, J.H. Choi* and T.H. Kim. "Experimental Characterization of Composite-to-Aluminum Hybrid Joints".

    UKC 2006

    . 2006.
  • 13. Young-Hwan Lee, Jin-ho Choi*, Jin-Hwe Kweon*. "Detection of the Acoustic Wave Using a Piezo Planar Array".

    ISAT-07

    . 2006.
  • 14. Jin-Hwe Kweon*, Gun-Myung Lee, Jin-ho Choi*, Tae-Hwan Kim. "Experimental Characterization of Composite-to-Aluminum Hybrid Joints".

    UKC2006

    . 2006.
  • 15. Hee-Jin Son, Jin-Hwe Kweon*, Jin-ho Choi*. "Progressive Failure and Strength Analysis of Composite Stringer Under Compression".

    ISAT-07

    . 2006.
  • 16. Tae-Hwan Kim, Ji-Young Choi, Jin-Hwe Kweon*, Jin-ho Choi*. "Progressive Failure Damage and Strength of Pinned Joint in Combined Unidirectionall-Fabric Laminated Composites".

    ISAT-07

    . 2006.
  • 17. Jin-Hwe Kweon*, Jin-ho Choi* and Jong-Rae Cho. "Progressive Failure Analysis of Composite Stiffeners for Air and Underwater Vehicle".

    ISMAI 2006

    . 2006.
  • 18. Young-Hwan Lee, Jin-ho Choi* and J.H. Kweon**. "A Study on the Crack Detection Using a Resonance Type Acoustic Emission".

    ISMAI 2006

    . 2006.
  • 19. Jin-Hwe Kweon*, Tae-Hwan Kim and Jin-ho Choi*. "Strength Analysis of Carbon-Epoxy Composite Joints under Pin Loading".

    APCATS' 2006

    . 2006.
  • 20. Young-Hwan Lee and Jin-Hwe Kweon*. "Strength of Composite Laminated Pin-Loaded Joint without the Clamping Force".

    APCATS' 2006

    . 2006.
  • 21. Choi, J.H.*, Kim, D.H., Kweon, J.H*. "Weight Optimization of Composite Flat and Curved Wings Satisfying Both Flutter and Divergence Constraints".

    ACCM-5

    . 2006.

In 2005

  • 1. T.H. Kim, J.W. Jung and J.H. Kweon**. "Experimental Study on the Strengths of Composite-to-Aluminum Hybrid Joints".

    IJU-HCMUT

    . 2005.
  • 2. Y.H. Yoo, J.H. Choi* and J.H. Kweon*. "A Study on the Failure Detection of the Composite Materials using the Acoustic Emission".

    ICCS-13

    . 2005.
  • 3. D.H. Kim, B.Alexander, J.H. Kweon* and J.H. Choi*. "Optimum Flutter Design of a Laminated Composite T-Tail Using Genetic Algorithm".

    ICCS-13

    . 2005.
  • 4. J.H. Choi*, Y.H. Yoo and J.H. Kweon*. "Strength Prediction of the Pin Joint Using the Linear Finite Element Analysis".

    ISMAI 2005

    . 2005.
  • 5. J.H. Kweon*. "A Numerical Method for the Nonlinear Analysis of Composite Shell Structures under Combined Loading".

    ISMAI 2005

    . 2005.
  • 6. J.W. Jung, S.Y. Choi, J.H. Kweon** and J.H. Choi*. "Strength of Composite to Aluminum Hybrid Joints with Combined Mechanical Fastening and Adhesive Bonding".

    ICCE-12

    . 2005.
  • 7. S.Y. Choi, J.W. Jung, J.H. Kweon**, and J.H. Choi*. "Nonlinear Analysis of Composite Shells under Incremental Compression and Constant Lateral Pressure".

    ICCE-12

    . 2005.

In 2004

  • 1. Jin-Hwe Kweon*, Jin-ho Choi*, Jae-Woo Jung, Sang-Kwan Lee. "A numerical Method to determine the characteristic lengths of composite joints".

    CST 2004

    . 2004.
  • 2. Jin-ho Choi*, Chung-O Ryu, Jin-Hwe Kweon*, Gun-Myung Lee. "Failure load prediction of mechanically fastened composite joints using the failure area index method".

    CST 2004

    . 2004.
  • 3. J.H. Kweon*, J.H. Choi*, J.W. Jung, S.G. Lee. "A Numerical Method to Determine the Characteristic Lengths of Composite Joints".

    CST 2004

    . 2004.
  • 4. J.H. Kweon*, S.Y. Choi, J.W. Chung and J.H. Choi*. "A Modified Characteristic Length Method to Characterize the Strength of Composite Joints".

    ISMAI 2004

    . 2004.

In 2003

  • 1. J.H. Kweon*, H.S. Ahn and J.H. Choi*. "A New Method to Determine the Characteristic Lengths of Composite Joints without Testing".

    ICCS-12

    . 2003.
  • 2. J.H. Choi*, Y.J. Chun and J.H. Kweon*. "The Prediction of the Composite Joint Strength Using the Failure Area Index Method".

    ICCM-14

    . 2003.

In 2001

  • 1. Jin-ho Choi* 외 2인. "A Study on the performance test and manufacture of the dielectric sensor for the cure monitoring of the high temperature composites".

    ICCM-13

    . 2001.
  • 2. Jin-ho Choi* 외 2인. "Cure Monitoring and Nondestructive Strain-Stress Sensing of Single Carbon Fiber Composites by the Measurement of Electrical Resistance".

    Korea-Japan Joint Symposium on Cmposite Meterials

    . 2001.

In 2000

  • 1. Jin-ho Choi* 외 6인. "Thermal and stress analysis of hyper target system".

    6th OECD/NEA IEM

    . 2000.
  • 2. J.H. Kweon*. "Crippling Behavior of Graphite/Epoxy Composite Stringers".

    ACCM-2000

    . 2000.
  • 3. Jin-ho Choi*, Jung-Do Seo, Dae-Gil Lee. "A study on the manufacturing of screw rotors using RTM process".

    ACCM-2000

    . 2000.
  • 4. J.H. Kweon*. "Crippling Analysis of Composite Stringers Based on Complete Unloading Method".

    CST-2000

    . 2000.

Domestic Conference

Upadted - 2020.02.05

(*Corresponding author.)

In 2020

In 2019

  • 1. 심형우, 백중택, 최진호*. "A Study on Single-lap Joint applied I-fiber Stitching Process" .

    한국복합재료학회

    추계학술발표회. 2019.
  • 2. 송상훈, Jonathan Tapullima, 최진호*. "I-fiber 스티칭 공법을 적용한 탄소 복합재 Mode Ⅱ 구조 해석에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2019.
  • 3. 백중택, 안우진, 최진호*. "MODE I 파손분석을 통한 I-fiber Stitching 공법의 공정 변수에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2019.
  • 4. 박규영, 안우진, 최진호*. "두께 방향으로 보강된 복합재 패널의 면내물성에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2019.
  • 5. 조현태, 박성민, 남영우*, 권진회*. "저온건조 및 고온다습 환경이 CFRP/Ni-Cr Alloy의 접착강도에 미치는 영향 연구" .

    한국복합재료학회

    추계학술발표회. 2019.
  • 6. 신준형, 정기원, 남영우*, 권진회*. "낙뢰에 의해 손상된 전자기파 흡수 복합재 레이더 반사면적의 특성에 관한 연구" .

    한국항공우주학회

    추계학술발표회. 2019.
  • 7. 권보성, 최현석, 성정원, 남영우*, 권진회*. "CF/PEKK 열가소성 복합재료의 성형 공정에 따른 기공률과 층간 강도 평가" .

    한국항공우주학회

    추계학술발표회. 2019.
  • 8. 정기원, 곽병수, 남영우*, 권진회*. "낙뢰 손상을 가지는 전자파흡수구조의 전자기적 특성" .

    항공우주시스템공학회

    추계학술발표회. 2019.
  • 9.곽병수, 남영우*, 권진회*. "금속이 코팅된 유전체 섬유를 이용한 광대역 전자기파 흡수 허니콤 코어 구조의 제작" .

    항공우주시스템공학회

    추계학술발표회. 2019.
  • 10.노지섭, 권진회*. "균열크기가 복합재 단일 겹침 체결부 강도에 미치는 영향 연구" .

    한국항공우주학회

    춘계학술발표회. 2019.
  • 11. 박성민, 최현석, 권진회*. "탄소-에폭시 복합재/INCONEL 합금 구조물간 접착 강도 향상을 위한 표면처리공법" .

    한국항공우주학회

    춘계학술발표회. 2019.
  • 12. 최현석, 성정원, 오세운, 이상민, 권진회*. "자동적층장비로 제작된 열가소성 복합재 적층판의 층간전단강도 연구" .

    한국항공우주학회

    춘계학술발표회. 2019.
  • 13. 성정원, 최현석, 오세운, 이상민, 권진회*. "열가소성 복합재 in-situ 공정을 위한 제작 변수 연구" .

    한국복합재료학회

    춘계학술발표회. 2019.
  • 14. 정기원, 곽병수, 권진회*. "Micro-bolt로 보강된 모자형 체결부 구조물의 Pull-off 시험" .

    한국복합재료학회

    춘계학술발표회. 2019.
  • 15. 윤현성, 김만성, 홍성진, 최진호*. "복합소재 제조 공정에 따른 미소 기공율 변화에 대한 연구" .

    한국복합재료학회

    춘계학술발표회. 2019.
  • 16. 박규영, 안우진, 최진호*. "I-fiber 스티칭 공법이 적용된 탄소 섬유 복합재 면내물성에 관한 연구" .

    한국복합재료학회

    춘계학술발표회. 2019.
  • 17. 곽병수, 정기원, 남영우*, 권진회*. "새로운 개념의 전자파 흡수 허니콤 코어 제작 및 평가" .

    한국복합재료학회

    춘계학술발표회. 2019.
  • 18. 이옥규, 백중택, 최진호*. "3차원 물성보강이 적용된 복합재의 충격특성에 관한 연구" .

    한국복합재료학회

    춘계학술발표회. 2019.
  • 19. 이옥규, 송상훈, 최진호*. "전기저항법을 이용한 CNT 함유량에 따른 복합재 접착 포인트의 결함탐지능에 관한 연구" .

    한국복합재료학회

    춘계학술발표회. 2019.

In 2018

  • 1. 최현석, 박성민, 손명숙, 김학인, 권진회*. "가스 터빈용 복합재-금속 접착구조물을 위한 표면처리 기법 연구" .

    한국항공우주학회

    추계학술발표회. 2018.
  • 2. 정병학, 이정률, 권진회*. "복합재에서 레이저 탄성파 구조 훈련을 통한 음향 방출 위치 탐지" .

    한국항공우주학회

    추계학술발표회. 2018.
  • 3. 곽병수, 정기원, 권진회*. "레진주입 수리법으로 수리된 복합재 구조의 기계적 특성 평가" .

    한국항공우주학회

    추계학술발표회. 2018.
  • 4. Rene Roy, Jin-Hwe Kweon. "Simulation of Composite Scarf Joint Repair with Variable Angle Tow Technology" .

    한국항공우주학회

    추계학술발표회. 2018.
  • 5. 박성민, 곽병수, 권진회*. "마이크로볼트 및 Z-핀으로 보강된 모자형 조인트 구조물의 Pull-off 시험" .

    한국항공우주학회

    추계학술발표회. 2018.
  • 6. 정기원, 강규석, 권진회*. "마이크로볼트로 수리된 복합재 적층판의 좌굴특성 연구" .

    한국항공우주학회

    추계학술발표회. 2018.
  • 7. Viet Hoai Truong, Byeong Su Kwak, Roy Rene, Jin Hwe Kweon*. "Cohesive zone method for failure analysis of scarf-patch repair compoosite laminates under bending load" .

    한국항공우주학회

    추계학술발표회. 2018.
  • 8. 강규석, 박상선, 권진회*. "마이크로 볼트를 이용한 복합재료 적층판의 층간분리 수리에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2018.
  • 9. 안우진, 김철환, 최진호*. "새로운 스티칭공법이 적용된 탄소섬유강화 복합재 단일겹침 체결부의 판단 강도" .

    한국복합재료학회

    추계학술발표회. 2018.
  • 10. 이광은, 최현석, 권진회*. "다양한 온도와 접착방법에 따른 스카프 수리 적층판의 접착강도 연구" .

    한국복합재료학회

    추계학술발표회. 2018.
  • 11. 윤현성, 김철환, 최진호*. "전기저항법을 이용한 CNT함량 및 결함 검출 기법에 따른 접착포인트의 강도 평가에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2018.
  • 12. 강규석, 성정원, 권진회*. "층간분리가 있는 복합재료 적층판의 스틸 마이크로볼트 수리법 연구" .

    한국항공우주학회

    춘계학술발표회. 2018.
  • 13. TRUONG VIET HOAI, 노지섭, 권진회*. "Failure load prediction of L-shaped composite laminate using cohesive zone model" .

    한국항공우주학회

    춘계학술발표회. 2018.
  • 14. Jonathan Tapullima, 김철환, 최진호*. "Mode I Interlaminar Fracture Toughness of Composite Laminate reinforced by Novel Stitching Process" .

    한국복합재료학회

    춘계학술발표회. 2018.
  • 15. 곽병수, 강규석, 박성민, 권진회*. "마이크로볼트를 이용하여 수리된 복합재 적층판의 굽힘거동 분석" .

    한국복합재료학회

    춘계학술발표회. 2018.
  • 16. 이광은, 성정원, 권진회*. "마이크로볼트로 보강한 스카프 조인트 적층판의 인장특성 연구" .

    한국복합재료학회

    춘계학술발표회. 2018.
  • 17. 백소정, 김철환, 최진호*. "CNT 함량에 따른 전기저항법의 결함탐지능 및 접착조인트의 강도 평가" .

    한국복합재료학회

    춘계학술발표회. 2018.
  • 18. Jonathan Tapullima, 김철환, 최진호*. "Mode I Interlaminar Fracture Toughness of Composite Laminate reinforced by Novel Stitching Process" .

    한국복합재료학회

    춘계학술발표회. 2018.
  • 19. Rene Roy, 곽병수, 권진회*. "Interlaminar strength effect on performance of composite crash structures" .

    한국복합재료학회

    춘계학술발표회. 2018.
  • 20. 김철환, 최진호*. "새로운 스티칭 공법 소개 및 기계적 특성 평가" .

    한국복합재료학회

    춘계학술발표회. 2018.

In 2017

  • 1. 강규석, 박상선, 권진회*. "층간분리가 발생한 탄소섬유 복합재료 적층판의 수리법에 따른 인장강도 회복률 연구" .

    항공우주시스템공학회

    추계학술발표회. 2017.
  • 2. 이광은, 최현석, 권진회*. "온도변화와 수리방법에 따른 스카프 수리 복합재 적층판의 정적 강도 연구" .

    항공우주시스템공학회

    추계학술발표회. 2017.
  • 3. 최현석, 곽병수, 성정원, 권진회*. "스카프 조인트 복합재 적층판의 온도 변화에 따른 피로강도 연구" .

    한국항공우주학회

    추계학술발표회. 2017.
  • 4. 이광은, 채송수, 박성민, 권진회*. "가압 히트 블랑켓을 이용해 수리한 복합재 적층판의 인장피로강도 연구" .

    한국항공우주학회

    추계학술발표회. 2017.
  • 5. 강규석, 박상선, 권진회*. "마이크로 볼트를 이용한 복합재료 적층판의 층간분리 수리에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2017.
  • 6. 이광은 최현석, 권진회*. "다양한 온도와 접착방법에 따른 스카프 수리 적층판의 접착강도 연구" .

    한국복합재료학회

    추계학술발표회. 2017.
  • 7. 채송수, 송상현, 권진회*. "경화압력의 차이가 복합재 적층판의 스카프수리부 강도에 미치는 영향" .

    한국항공우주학회

    춘계학술발표회. 2017.
  • 8. 박상선, 강규석, 권진회*. "마이크로 볼트를 이용하여 수리된 복합재 적층판의 인장강도 회복률 연구" .

    한국항공우주학회

    춘계학술발표회. 2017.
  • 9. 박상선, 이광은, 권진회*. "층간분리된 복합재 구조물의 마이크로 볼트 수리 후 좌굴특성 연구" .

    한국복합재료학회

    춘계학술발표회. 2017.

In 2016

  • 1. 최현석, 변창석, 권진회*. "스카프 조인트로 수리한 복합재 적층판의 온도 변화에 따른 정적 강도 연구" .

    한국항공우주학회

    추계학술발표회. 2016.
  • 2. 박상선, 곽병수, 김홍일, 동승진, 권진회*. "다중 코어를 가지는 복합재료 샌드위치 구조의 강도 시험 연구" .

    한국항공우주학회

    추계학술발표회. 2016.
  • 3. 안가영, 최진호*, 권진회*. "스카프 패치 수리과정에서 접착제 경화 압력이 인장 강도에 미치는 효과 연구" .

    한국복합재료학회

    춘계학술발표회. 2016.
  • 4. 변창석, 김충현, 박민영, 최진호*, 권진회*. "스카프 비와 결함의 크기에 다른 복합재 적층판의 수리 후 정적 강도 및 피로 강도 복원 평가" .

    한국복합재료학회

    춘계학술발표회. 2016.
  • 5. Kwak byeong-su, Kim Hong-il,Dong seung-Jin, Choi Jin-Ho* and Kweon Jin-Hwe*. "An experimental study on the failure of a novel composite sandwich structures" .

    한국복합재료학회

    춘계학술발표회. 2016.

In 2015

  • 1. TRUONG VIET HOAI, 김충현, 유재승, 최진호*, 권진회*. "Prediction failure load of scarf bonded joints by using the damage zone method" .

    한국항공우주학회

    추계학술발표회. 2015.
  • 2. 변창석, 유재승, 피준우, 박민영, 최진호*, 권진회*. "스카프 길이와 결함의 크기에 따른 복합재 적층판의 패치 수리 후 정적 강도 복원 평가" .

    한국항공우주학회

    추계학술발표회. 2015.
  • 3. 주현우, 김지현, 최진호*, 권진회*. "두꺼운 복합재료 구조물의 시험과 검증 해석 연구" .

    한국항공우주학회

    추계학술발표회. 2015.
  • 4. 주현우, 김지현, 최진호*, 권진회*. "유한요소해석을 이용한 스파(Spar) 구조의 파손 해석 연구" .

    한국복합재료학회

    추계학술발표회. 2015.
  • 5. 변창석, 유재승, 박민영, 최진호*, 권진회*. "스카프 비와 결함의 크기에 따른 복합재 적층판의 수리 후 정적 강도 및 피로 강도 복원 평가" .

    한국복합재료학회

    추계학술발표회. 2015.
  • 6. 최진호*. "CNT 분산 방법에 따른 접착조인트의 저항 및 분산성 평가" .

    한국복합재료학회

    춘계학술발표회. 2015.

In 2014

  • 1. Rene Roy, 유재승, 권진회*, 최진호*. "탄소 섬유강화 복합재 평판의 자유진동해석" .

    한국복합재료학회

    추계학술발표회. 2014.
  • 2. 피준우, 고명균, 변창석, 권진회*, 최진호*. "가혹 환경에서의 요철핀으로 보강된 단일겹침체결부의 피로거동 연구" .

    한국복합재료학회

    추계학술발표회. 2014.
  • 3. 김지현, 곽병수, 안가영, 권진회*, 최진호*. "곡률을 가지는 복합재 구조물의 두께 방향 강도 분석 연구" .

    한국복합재료학회

    추계학술발표회. 2014.
  • 4. 김충현, 김동관, TRUONG VIET HOAI, 권진회*, 최진호*. "요철 형상의 스테인리스 핀으로 보강된 복합재 모자형 체결부의 피로강도 연구" .

    한국복합재료학회

    추계학술발표회. 2014.
  • 5. Rene Roy, 권진회*, 최진호*. "볼트가 결합된 하니콤 코어 샌드위치의 FEM 분석" .

    한국복합재료학회

    춘계학술발표회. 2014.
  • 6. 고명균, 피준우, 권진회*, 최진호*. "요철 형상 핀으로 보강된 복합재 단일겹침 체결부의 피로성능 연구" .

    한국복합재료학회

    춘계학술발표회. 2014.
  • 7. 김동관, 김충현, 권진회*, 최진호*. "요철 형상의 스테인리스 핀으로 보강된 모자형 복합재 체결부의 정적 거동" .

    한국복합재료학회

    춘계학술발표회. 2014.

In 2013

  • 1. 박성준, 고명균, 김동관, 권진회*. "복합재 적층판의 전단시험치구 설계에 관한 연구" .

    항공특성화대학

    지원사업 학술발표회, 2013.
  • 2. 김동관, 지훈, 권진회*, 최진호*. "스테인리스 핀으로 보강된 모자형 복합재 체결부의 피로 특성 연구" .

    한국복합재료학회

    추계학술발표회. 2013.
  • 3. 고명균, 손한기, 권진회*, 최진호*. "Stainless Steel 핀으로 보강된 복합재 단일 겹침 체결부의 가혹환경 피로 강도 연구" .

    한국복합재료학회

    추계학술발표회. 2013.
  • 4. Deepak Kumar, Jin-Hwe Kweon*, Jin-Ho Choi*. "A Finite Element Modeling of Low Velocity Impact in Laminated Composite Using Continuum Shell element" .

    한국항공우주학회

    추계학술발표회. 2013.
  • 5. 박성준, Rene Roy, 권진회*, 최진호*. "노멕스 하니컴과 구성성분의 기계적 물성을 위한 실험적 연구" .

    한국항공우주학회

    추계학술발표회. 2013.
  • 6. 고명균, 손한기, 권진회*, 최진호*. "가혹 환경에서 두께방향으로 보강된 복합재 단일겹침 체결부의 피로특성" .

    한국항공우주학회

    추계학술발표회. 2013.
  • 7. 김동관, 지훈, 권진회*, 최진호*. "스테인리스 핀으로 보강된 모자형 체결부의 파손 특성" .

    한국항공우주학회

    추계학술발표회. 2013.
  • 8. 유건아, 박용빈, 송민환, 권진회*, 최진호*. "성형압력의 변화가 탄소/에폭시 복합재료 적층판의 기계적 강도에 미치는 영향연구" .

    한국복합재료학회

    춘계학술발표회. 2013.
  • 9. 박성준, 박용빈, 고명균, 권진회*, 최진호*. "풀아웃 하중을 받는 카본/ BMI 샌드위치 체결부의 가혹환경에 따른 파손 특성 연구" .

    한국복합재료학회

    춘계학술발표회. 2013.
  • 10. 이옥규, 윤종화, 최진호*, 권진회*. "원공 공차를 가진 다중 볼트 조인트의 파손강도에 관한 연구" .

    한국복합재료학회

    춘계학술발표회. 2013.
  • 11. 이옥규, 강민효, 최진호*, 권진회*. "탄소 나노튜브를 함유한 접착 체결부의 강도 평가" .

    한국복합재료학회

    춘계학술발표회. 2013.
  • 12. 지훈, 박용빈, 김동관, 권진회*, 최진호*. "스테인리스강 핀으로 보강된 모자형 보강판의 풀오프 강도 연구" .

    한국복합재료학회

    춘계학술발표회. 2013.
  • 13. 손한기, 디박쿠마, 박용빈, 권진회*, 최진호*. "AFP 기술 적용을 위한 복합재 동체 구조 설계 및 해석" .

    한국복합재료학회

    춘계학술발표회. 2013.

In 2012

  • 1. 지훈, 이병희, 박용빈, 권진회*. "Z-핀이 삽입된 복합재 단일겹침 접착 체결부의 파손 거동 연구" .

    항공특성화대학 지원사업 학술발표회

    . 2012.
  • 2. 지훈, 윤상욱, 박성준, 권진회*, 최진호*, 한종수. "GFRP와 PMI폼으로 제작된 950 lb급 수상항공기용 플로트의 구조해석 연구" .

    한국복합재료학회

    추계학술발표회. 2012.
  • 3. 윤종화, 김철환, 최진호*, 권진회*. "L-형 보강재를 가진 복합재 패널의 제작과 평가" .

    한국복합재료학회

    추계학술발표회. 2012.
  • 4. 유건아, 이경찬, 박용빈, 권진회*, 최진호*, 송민환. "성형압력의 변화가 복합재료 적층판의 압축강도에 미치는 영향 연구" .

    한국복합재료학회

    추계학술발표회. 2012.
  • 5. 손한기, 이병희, 박용빈, 권진회*, 최진호*, 최익현. "Stainless Steel 핀으로 보강된 복합재 단일 겹침 체결부의 피로특성 연구" .

    한국복합재료학회

    추계학술발표회. 2012.
  • 6. Rene Roy, 박용빈, 권진회*, 최진호*. "곡면형상의 알루미늄 하니콤/CFRP 샌드위치 패널에 관한 실험적 연구" .

    한국복합재료학회

    추계학술발표회. 2012.
  • 7. 이옥규, 강민효, 최진호*, 권진회*. "볼트 조인트와 핀 조인트의 체결부 파손 강도평가" .

    한국복합재료학회

    추계학술발표회. 2012.
  • 8. 최진호*, 김신오, 성동기, 이상복, 엄문광. "VARTM 공정에서 수지 함침에 따른 섬유 보강재의 팽창 현상에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2012.
  • 9. 최진호*, 안종무,이원오,엄문광․이상복․이진우. "복합재 액상 성형을 위한 수력학적 마찰계수의 측정" .

    한국복합재료학회

    추계학술발표회. 2012.
  • 10. 이옥규, 윤종화, 박진하, 최진호*, 권진회*. "L-형 보강재가 포함된 복합재 구조물의 강도평가" .

    한국복합재료학회

    춘계학술발표회. 2012.
  • 11. 윤상욱, 박용빈, 이경찬, 권진회*, 최진호*, 조현일. "온습도 변화에 따른 카본/BMI-노멕스 샌드위치 인서트 체결부의 풀아웃 및 베어링 강도 연구" .

    한국복합재료학회

    춘계학술발표회. 2012.
  • 12. 이경찬, 박용빈, 권진회*, 최진호*, 조현일. "cNT 분산 방법에 따른 접착조인트의 저항 및 분산성 평가" .

    한국복합재료학회

    춘계학술발표회. 2012.
  • 13. 이병희, 박용빈, 권진회*, 최진호*, 최익현. "금속 핀으로 보강된 복합재료 단일겹침 체결부의 강도 연구" .

    한국복합재료학회

    춘계학술발표회. 2012.
  • 14. 최진호*, 이옥규, 강민효, 정강우, 권진회*. "원공 공차를 가진 볼트 조인트의 강도평가" .

    한국복합재료학회

    춘계학술발표회. 2012.

In 2011

  • 1. Nguyen Khanh Hung,박용빈, 권진회*, 최진호*, 설창원. "풀아웃 하중을 받는 폼 코어 샌드위치 조인트의 시험 및 수치 연구" .

    한국항공우주학회

    추계학술발표회. 2011.
  • 2. 윤상욱, 정문규, 박용빈, 권진회*, 최진호*, 신상준, 송민환, 송근일. "수리방법에 따른 복합재 구조물의 인장강도 연구" .

    한국항공우주학회

    추계학술발표회. 2011.
  • 3. 느엥칸훙, 정문규, 권진회*, 최진호*, 김인걸. "노멕스 코어 샌드위치 판넬의 고속충돌 파손 연구" .

    한국복합재료학회

    추계학술발표회. 2011.
  • 4. 박진하, 최진호*, 권진회*. "FBG 센서를 이용한 횡하중을 받는 복합재 쉘의 파손 감지" .

    한국복합재료학회

    추계학술발표회. 2011.
  • 5. 이경찬, 김지선, 권진회*, 최진호*. "외부수압을 받는 샌드위치 복합재 원통의 최적설계" .

    한국복합재료학회

    추계학술발표회. 2011.
  • 6. 이병희, 박용빈, 권진회*, 최진호*, 최익현. "탄소 핀으로 보강된 복합재 적층판의 면내 물성에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2011.
  • 7. 박진하, 정강우, 최진호*, 권진회*. "AE기법을 이용한 필라멘트 와인딩 복합재 원통의 균열감지" .

    한국복합재료학회

    춘계학술발표회. 2011.
  • 8. 정강우, 박진하, 박용빈, 최진호*, 권진회*. "복합재료 키조인트의 강도평가 연구" .

    한국복합재료학회

    춘계학술발표회. 2011.
  • 9. 윤상욱, 박용빈, 권진회*, 최진호*, 최익현. "Z-핀으로 보강된 복합재 평판의 특성 연구" .

    한국복합재료학회

    춘계학술발표회. 2011.
  • 10. 정문규, 박용빈, 윤상욱, 권진회*, 최진호*, 송근일. "습식적층방식으로 제작된 유리/에폭시 복합재의 전단강도에 대한 작업조건의 영향 연구" .

    한국복합재료학회

    춘계학술발표회. 2011.
  • 11. 느엥칸훙, 박용빈, 권진회*, 최진호*. "풀아웃 하중을 받는 폼코어 샌드위치 조인트의 파손해석기법 연구" .

    한국복합재료학회

    춘계학술발표회. 2011.
  • 12. 박용빈, 이병희, 권진회*, 최진호*, 최익현. "Z-핀으로 보강된 복합재 T-조인트의 강도 연구" .

    한국복합재료학회

    춘계학술발표회. 2011.
  • 13. 김지선, 이경찬, 권진회*, 최진호*. "수중운동체 적용을 위한 샌드위치 복합재 원통의 좌굴 해석 및 시험" .

    한국복합재료학회

    춘계학술발표회. 2011.
  • 14. 이병희, 박용빈, 최배현, 권진회*, 최진호*, 최익현. "Z-피닝 기술을 이용한 복하재 단일겹침 체결부의 전단강도 특성 연구" .

    한국항공우주학회

    춘계학술발표회. 2011.
  • 15. 이경찬, 박용빈, 권진회*, 최진호*. "전단하중을 받는 알루미늄 샌드위치 구조무르이 파손특성 연구" .

    한국항공우주학회

    춘계학술발표회. 2011.

In 2010

  • 1. 김지선, 문철진, 권진회*, 최진호*. "외부 수압을 받는 샌드위치 복합재 원통의 제작 및 시험" .

    한국복합재료학회

    추계학술발표회. 2010.
  • 2. 정문규, 양현정, 권진회*, 최진호*. "수분율 변화에 따른 복합재 단일겹침 접착 체결부의 강도 연구" .

    한국복합재료학회

    추계학술발표회. 2010.
  • 3. 느엥칸훙, 박용빈, 권진회*, 최진호*, 조현일. "폼코어를 사용한 복합재 샌드위치 조인트의 강도 연구" .

    한국복합재료학회

    추계학술발표회. 2010.
  • 4. 양현정, 정문규, 권진회*, 최진호*. "염수환경에 노출된 복합재 단일겹침 접착 체결부의 강도 연구" .

    한국복합재료학회

    추계학술발표회. 2010.
  • 5. 김인훈, 최배현, 박용빈, 권진회*, 최익현. "Z-피닝을 이용한 복합재 적층판 및 조인트의 특성 연구" .

    한국복합재료학회

    추계학술발표회. 2010.
  • 6. 박용빈, 권진회*, 최진호*, 조현일. "복합재 샌드위치 조인트의 베어링 강도 연구" .

    한국복합재료학회

    추계학술발표회. 2010.
  • 7. 김지선, 문철진, 권진회*, 최진호*. "수중운동체 적용을 위한 필라멘트 와인딩 복합재 원통의 적층각 최적설계" .

    한국복합재료학회

    춘계학술발표회. 2010.
  • 8. 양현정, 박용빈, 권진회*, 최진호*, 조현일. "복합재 샌드위치 조인트의 파손거동 연구" .

    한국복합재료학회

    춘계학술발표회. 2010.
  • 9. 최배현, 권진회*, 최진호*, 이태주. "샌드위치와 적층판을 접착한 조인트의 파손에 대한 인자연구" .

    한국복합재료학회

    춘계학술발표회. 2010.
  • 10. 김인훈, 최배현, 권진회*, 최진호*, 신상준, 송민환. "KC-100 항공기 구조물의 복합재 T-조인트 인장분리 강도 연구" .

    한국항공우주학회

    춘계학술발표회. 2010.
  • 11. 박용빈, 권진회*, 최진호*, 조현일. "풀아웃 하중을 받는 알루미늄 샌드위치 체결부의 파손특성 연구" .

    한국항공우주학회

    춘계학술발표회. 2010.

In 2009

  • 1. N.T Nguyen, K. H. Nguyen, 박용빈, 권진회*. "복잡한 미세구조의 복합재료 특성 연구" .

    한국항공우주학회

    추계학술발표회. 2009.
  • 2. 송민규, 김인훈, 최배현, 권진회*, 최진호*, 이태주, 신상준, 송민환. "KC-100 항공기용 샌드위치-적층판 단일겹침 접착 체결부 강도특성 연구" .

    한국항공우주학회

    추계학술발표회. 2009.
  • 3. 이흔주, 신인수, 박규철, 권진회*. "복합재 적층판의 파손해석을 위한 인자 연구" .

    한국복합재료학회

    추계학술발표회. 2009.
  • 4. 문철진, 권진회*, 최진호*, 조종래, 조상래, 조윤식. "외부 수압을 받는 필라멘트 와인딩 복합재 원통의 두께에 따른 좌굴 연구" .

    한국복합재료학회

    추계학술발표회. 2009.
  • 5. 김인훈, 송민규, 권진회*, 최진호*, 신상준, 송민환. "KC-100 항공기용 복합재 T-조인트의 인장분리 실험 연구" .

    한국복합재료학회

    추계학술발표회. 2009.
  • 6. 박용빈, 구옌낙트렁, 느엥칸훙, 권진회*. "Perforated 복합재 평판의 좌굴 해석" .

    한국복합재료학회

    추계학술발표회. 2009.
  • 7. 느엥칸훙, 구옌낙트렁, 박용빈, 권진회*. "랜덤하게 분포하는 구형입자가 보강된 복합재의 충격해석" .

    한국복합재료학회

    추계학술발표회. 2009.
  • 8. 문철진, 권진회*, 최진호*, 조종래, 조상래, 조윤식, 전재진. "고심도 수중운동체의 내압선체 설계를 위한 필라멘트 와인딩 복합재 원통의 좌굴해석 및 시험" .

    한국군사과학기술학회

    . 2009.
  • 9. 김중진, 최배현, 김인훈, 양현정, 권진회*, 한종수. "유리섬유 복합재 표적기 구조해석 연구" .

    한국복합재료학회

    춘계학술발표회. 2009.
  • 10. 송민규, 권진회*, 최진호*, 이태주, 신상준, 송민환. "복합재 접착 체결부의 제작공정에 관한 실험연구" .

    한국복합재료학회

    춘계학술발표회. 2009.
  • 11. 송민규, 권진회*, 최진호*, 송민환, 신상준, 이태주. "항공우주용 복합재 접착 조인트 설계허용치 실험 연구" .

    우주발사체기술 심포지엄

    . 2009.

In 2008

  • 1. 송민규, 김경수, 권진회*, 최진호*. "알루미늄-알루미늄과 복합재-복합재 단일겹침 체결부의 접착면 전처리 방법에 관한 전단강도 특성 연구" .

    한국복합재료학회

    추계학술발표회. 2008.
  • 2. 문철진, 허성화, 권진회*, 최진호*, 조종래, 조상래. "외부 수압을 받는 필라멘트 와인딩 복합재 원통의 후좌굴 해석 및 실험" .

    한국복합재료학회

    추계학술발표회. 2008.
  • 3. 김건희, 반창수, 최진호*, 권진회*. "레이저 유도 초음파을 이용한 복합재 특성 평가" .

    한국복합재료학회

    추계학술발표회. 2008.
  • 4. 박재현, 임도완, 최진호*, 권진회*. "수정파손영역법을 이용한 단일겹침 접착조인트의 파손강도 예측" .

    한국복합재료학회

    추계학술발표회. 2008.
  • 5. 박용빈, 송근일, 권진회*, 최진호*, 김광수, 장영순. "풀아웃 하중에 대한 복합재 샌드위치 인써트 조인트의 유한요소해석" .

    한국항공우주학회

    추계학술발표회. 2008.
  • 6. 최진호*, 김중진, 문철진, 허성화, 이청락, 권진회*. "염수환경에 의한 UPN139 탄소/에폭시 복합재 물성치 변화 연구" .

    대한기계학회

    경남지부 추계학술회, 2008.
  • 7. 최진호*, 박재현, 양해석, 정해용. "수정 파손 영역법을 이용한 접착 조인트의 파손강도 예측" .

    한국군사과학기술학회

    . 2008.
  • 8. 이영환, 임도완, 반창수, 최진호*, 권진회*. "복합재 하이브리드 조인트의 강도 예측" .

    한국복합재료학회

    춘계학술발표회. 2008.
  • 9. 송근일, 권진회*, 최진호*, 김광수. "하니콤 코어 샌드위치 인써트 조인트의 파손강도에 관한 인자연구" .

    우주발사체기술 심포지엄

    . 2008.

In 2007

  • 1. 송근일, 최지영, 권진회*, 최진호*, 김광수, 장영순. "하니콤 코어 샌드위치 구조물의 인써트 조인트 강도에 관한 인자연구" .

    한국항공우주학회

    추계학술발표회. 2007.
  • 2. Khanh-Hung Nyuyen, 성명수, 권진회*, 최진호*. "Experimental and numerical studies on the strength of composite-to-aluminum single lap bonded joints" .

    한국항공우주학회

    추계학술발표회. 2007.
  • 3. 반창수, 이영환, 최진호*, 권진회*. "파손영역법을 이용한 복합재 접착 조인트의 파손강도 예측" .

    한국복합재료학회

    추계학술발표회. 2007.
  • 4. 성명수, 김홍주, 권진회*, 최진호*. "복합재-알루미늄 단일겹침 리벳-접착 하이브리드 체결부 강도 특성" .

    한국복합재료학회

    추계학술발표회. 2007.
  • 5. 최진호*, 임도완, 성명수(교신), 권진회*, 박홍식. "자동차 복합재 브레이크 디스크의 최대토크 전달능력" .

    한국복합재료학회

    추계학술발표회. 2007.
  • 6. 최진호*, 이영환, 반창수, 권진회*, 양해석. "복합재 하이브리드 조인트의 강도특성평가" .

    한국군사과학기술학회

    . 2007.
  • 7. 허성화, 권진회* 외 4인. "외부하중을 받는 복합재 원통의 후좌굴 수치해석 및 실험" .

    한국군사과학기술학회

    . 2007.
  • 8. 최지영, 성명수, 권진회*, 최진호*, 김광수, 장영순. "전단하중을 받는 샌드위치 인써트 조인트의 강도특성 연구" .

    한국복합재료학회

    춘계학술발표회. 2007.
  • 9. 이영환, 임도완, 반창수, 최진호*, 권진회*. "복합재 하이브리드 조인트의 강도특성 평가" .

    한국복합재료학회

    춘계학술발표회. 2007.
  • 10. 송민환, 권진회* 외 7인. "단일겹침 리벳 조인트된 카본/에폭시 복합재의 열노출 이후 강도 실험연구" .

    한국복합재료학회

    춘계학술발표회. 2007.
  • 11. 최지영, 권진회*, 김광수, 장영순. "샌드위치 인써트 조인트의 풀아웃 강도특성 연구" .

    한국복합재료학회

    춘계학술발표회. 2007.
  • 12. 최지영, 권진회*, 최진호*, 김광수, 장영순. "복합재 샌드위치 인써트 조인트 강도 실험연구" .

    우주발사체기술 심포지엄

    . 2007.

In 2006

  • 1. 손희진, 권진회*, 조맹효, 최진호*. "복합재 쉘 구조해석용 프로그램 ACOS 개발" .

    한국복합재료학회

    추계학술발표회. 2006.
  • 2. 김홍석, 김태환, 권진회*, 최진호*. "염수환경에 노출된 탄소섬유강화 복합재의 물성변화에 관한 실험 연구" .

    한국복합재료학회

    추계학술발표회. 2006.
  • 3. 김태환, 이창재, 권진회*, 최진호*. "탄소 복합재-알루미늄 이종재료 단일겹침 접합 체결부의 강도에 관한 실험 연구" .

    한국항공우주학회

    추계학술발표회. 2006.
  • 4. 손희진, 권진회*, 최진호*, 조종래, 조상래. "수압을 받는 복합재 원통의 좌굴해석" .

    한국항공우주학회

    추계학술발표회. 2006.
  • 5. 조상래, 김현수, 구정본, 조종래, 권진회*, 최진호*. "수압을 받는 복합재 원통의 최종강도 실험 연구" .

    한국해양공학회

    정기학술발표회. 2006.
  • 6. 박효근, 김동현, 최진호*, 권진회*, 이영환, 양승운. "대형 LCD 패널 제조용 복합재 롤러의 회전체 동역학 해석" .

    대한기계학회

    . 2006.
  • 7. 유연호, 이영환, 최진호*, 권진회*, 변준형. "메트릭스형 피에조 센서를 이용한 복합재료의 AE신호분석" .

    한국복합재료학회

    춘계학술발표회. 2006.

In 2005

  • 1. 조종래, 정해영, 권진회*, 최진호*, 조윤식. "복합재 내압선체의 좌굴압력에 관한 유한요소해석" .

    한국마린엔지니어링학회

    후기학술발표회. 2005.
  • 2. 최수영, 손희진, 권진회*, 최진호*, 조종래. "횡하중을 받는 복합재 원통판넬의 후좌굴 해석" .

    한국복합재료학회

    추계학술발표회. 2005.
  • 3. 정재우, 김태환, 권진회*, 최진호*. "복합재-알루미늄 이종재료 하이브리드 체결부 강도 특성에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2005.
  • 4. 정재우, 권진회*, 최진호*, 송민환. "탄소-알루미늄 이종재료 하이브리드 체결부 강도에 관한 실험연구" .

    한국복합재료학회

    추계학술발표회. 2005.
  • 5. 최수영, 권진회*, 최진호*, 조종래. "횡분포하중을 받는 초고강성 복합재 셸의 좌굴" .

    한국복합재료학회

    추계학술발표회. 2005.
  • 6. 정해영, 조종래, 배원병, 권진회*, 최진호*. "외압을 받는 복합재 셸의 좌굴해석을 위한 실험 및 수치해석 연구" .

    한국소성가공학회

    추계학술발표회. 2005.
  • 7. 정재우, 송민환, 권진회*, 최진호*. "알루미늄과 카본 복합재의 하이브리드 체결강도에 대한 실험 연구" .

    한국자동차공학회

    부산울산경남지부 춘계학술발표회, 2005.
  • 8. 류충오, 유연호, 이영환, 최진호*, 권진회*. "압축력이 존재하는 복합재료 조인트의 파손강도 예측" .

    한국자동차공학회

    부산울산경남지부 춘계학술발표회, 2005.
  • 9. 정재우, 송민환, 권진회*, 최진호*. "금속-복합재 하이브리드 체결부의 강도특성 평가" .

    한국복합재료학회

    춘계학술발표회. 2005.
  • 10. 류충오, 유연호, 이영환, 최진호*, 권진회*. "클램핑 포스가 존재하는 복합재료 조인트의 특성평가" .

    한국복합재료학회

    춘계학술발표회. 2005.
  • 11. 최진호*, 정해영, 조종래, 배원병, 권진회*. "외압을 받는 복합재 셀의 조굴해석을 위한 실험 및 수치연구" .

    한국소성가공학회

    . 2005.

In 2004

  • 1. 엄원섭, 장재호, 이철재, 정재우, 권진회*. "복합재 외부연료탱크 하이브리드 체결부의 구조해석" .

    한국복합재료학회

    추계학술발표회. 2004.
  • 2. 권진회*, 최진호*, 강봉수, 정재우, 최수영. "복합재 체결부 강도해석을 위한 수치적 방법 연구" .

    2004 항공우주 무기체계 발전 세미나

    . 2004.
  • 3. 최진호*, 장승환, 장태성, 전성식. "직조 탄소섬유 발포 고분자 샌드위치 구조의 굽힘특성" .

    한국복합재료학회

    추계학술발표회. 2004.
  • 4. 이명수, 권진회*, 강기환, 이광영. "초음속 항공기용 복합재 플래퍼론의 구조설계 및 해석" .

    한국복합재료학회

    추계학술발표회. 2004.
  • 5. 권진회*, 최진호*, 조종래. "횡압력과 압축력을 동시에 받는 복합재 쉘의 비선형 좌굴해석" .

    해상무기체계 발전 세미나

    함정기술분과. 2004.
  • 6. 이창훈, 최진호*, 권진회*, 변준형, 유연호. "Acoustic Emission을 이용한 복합재료 구조물의 비파괴 특성 연구" .

    한국복합재료학회

    춘계학술발표회. 2004.
  • 7. 강봉수, 정재우, 권진회*, 최진호*. "복합재 체결부 강도해석을 위한 새로운 수치해석 방법" .

    한국복합재료학회

    춘계학술발표회. 2004.
  • 8. 권진회*, 최수영, 최진호*, 이상관, 박영환. "풀트루젼과 와인딩 기법을 혼합한 탄소-유리 하이브리드 복합재 보강근 설계" .

    한국복합재료학회

    춘계학술발표회. 2004.
  • 9. 엄원섭, 정재우, 권진회*, 최진호*, 양승운, 이상관. "항공기용 복합재 외부연료탱크 체결부의 3차원 구조해석" .

    한국복합재료학회

    춘계학술발표회. 2004.

In 2003

  • 1. 최진호*, 안현수. 권진회*. "복합재 체결부의 파손해석을 위한 새로운 특성길이 결정 방법" .

    한국복합재료학회

    추계학술발표회. 2003.
  • 2. 최영준, 최진호*, 권진회*,변준형, 양승운. "선형해석을 이용한 복합재료 기계적 체결부의 강도평가에 관한 연구" .

    한국복합재료학회

    춘계학술발표회. 2003.
  • 3. 최진호*, 안현수, 신소영, 권진회*, 이상관, 양승운. "일방향-평직 복합재 혼합 적층판의 체결부 강도 연구" .

    한국항공우주학회

    춘계학술발표회. 2003.
  • 4. 최진호*, 전영준, 권진회*. "파괴면적지수법을 이용한 복합재료 기계적 체결부의 강도평가에 관한 연구" .

    한국복합재료학회

    춘계학술발표회. 2003.

In 2002

  • 1. 이춘우, 권진회*. "복합재 실린더의 비틀림 좌굴 특성 연구" .

    한국복합재료학회

    추계학술발표회. 2002.
  • 2. 장기정, 박노회, 안현수, 권진회*, 최진호*. "비대칭 경계조건을 가지는 체결부의 3차원 접촉응력해석" .

    한국복합재료학회

    추계학술발표회. 2002.
  • 3. 최정석, 신소영, 안현수, 권진회*. "재료 비선형성을 고려한 일방향-평직 혼합 적층 복합재 체결부의 점진적 파손 해석" .

    한국복합재료학회

    추계학술발표회. 2002.
  • 4. 전영준, 최진호*, 권진회*, 양승운, 김광수. "파괴면적지수법을 이용한 조인트 강도 예측에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2002.
  • 5. 최진호*, 전영준, 권진회*. "기계적으로 체결된 복합재료 조인트의 강도에 관한 연구" .

    한국복합재료학회

    추계학술발표회. 2002.
  • 6. 신소영, 안현수, 권진회*. "점진적 파손해석 기법을 이용한 일방향-평직 혼합 적층 복합재 체결부의 강도" .

    한국복합재료학회

    춘계학술발표회. 2002.
  • 7. 안현수, 신소영, 권진회*, 최진호*, 이상관, 양승운. "일방향-평직 복합재 혼합 적층판의 기계적 체결부 강도에 관한 인자연구" .

    한국복합재료학회

    춘계학술발표회. 2002.
  • 8. 전영준, 최진호*, 권진회*. "파괴면적지수법에 의한 복합재료 체결부의 강도평가" .

    한국복합재료학회

    춘계학술발표회. 2002.
  • 9. 최진호* 외 5인. "일방향-평직 복합재 혼합 적층판의 기계적 체결부 강도에 관한 연구" .

    한국복합재료학회

    춘계학술발표회. 2002.
  • 10. 최진호* 외 2인. "파괴면적지수법에 의한 복합재료 체결부의 강도평가" .

    한국복합재료학회

    춘계학술발표회. 2002.
  • 11. 최진호* 외 4인. "비대칭 경계조건을 가지는 체결부의 3차원 접촉응력해석" .

    한국복합재료학회

    추계학술발표회. 2002.
  • 12. 최진호* 외 4인. "파괴면적지수법을 이용한 조인트 강도예측에 관한연구" .

    한국복합재료학회

    추계학술발표회. 2002.

In 2001

  • 1. 최진호* 외 1인. "복합재료외팔보가 장착된 와이어 방전가공기의 성능평가" .

    대한기계학회

    재료 및 파괴부문, 2001.
  • 2. 강경국, 박노회, 신소영, 안현수, 권진회*. "다중하중조건을 고려한 항공기 날개의 유한요소이상화 기법 연구" .

    대한기계학회

    경남지부 춘계학술발표회, 2001.
  • 3. 신소영, 박노회, 강경국, 권진회*, 이상관, 변준형. "점진적 파손해석기법을 이용한 복합재 체결부의 강도해석" .

    한국복합재료학회

    춘계학술발표회. 2001.
  • 4. 박노회, 안현수, 권진회*, 최진호*, 양승운, 김광수. "핀하중을 받는 복합재 조종봉 체결부의 강도" .

    한국복합재료학회

    춘계학술발표회. 2001.
  • 5. 최진호* 외 5인. "핀 하중을 받는 복합재 조종봉 체결부의 강도" .

    한국복합재료학회

    춘계학술발표회. 2001.
  • 6. 박노회, 권진회*, 최진호*, 김광수, 이상관. "특성길이 개념을 이용한 복합재료 적층판의 기계적 체결부 해석방법연구" .

    한국항공우주학회

    춘계학술발표회. 2001.
  • 7. 최진호*, 김일영, 이대길. "고온 복합재료의 경화 모니터링을 위한 고온 유전센서의 제작 및 성능평가에 관한 연구" .

    한국복합재료학회

    춘계학술발표회. 2001.
  • 8. 안현수, 박노회, 신소영, 강경국, 권진회*. "복합재 적층판의 체결부 강도에 관한 인자연구" .

    2001 MSC Korea 2nd Solution Fair

    . 2001.

In 2000

  • 1. 최진호* 외 3인. "고온복합재료의 경화모니터링을 위한 유전센서의 개발" .

    한국복합재료학회

    추계학술발표회. 2000.
  • 2. 최상민, 권진회*. "Graphite/Epoxy 스트링거의 크리플링 실험" .

    한국복합재료학회

    추계학술발표회. 2000.
  • 3. 강경국, 권길영, 박노회, 권진회*, 박찬우. "다중스파 날개박스의 유한요소 이상화 기법연구" .

    한국항공우주학회

    추계학술발표회. 2000.
  • 4. 강경국, 박노회, 권길영, 권진회*. "다중스파 날개박스의 유한요소 이상화 기법연구" .

    2000 MSC Korea 1st Solution Fair

    . 2000.
  • 5. 최상민, 김진호, 권진회*. "일정 횡하중과 증분 압축하중을 동시에 받는 복합적층 판넬의 좌굴 해석" .

    한국복합재료학회

    춘계학술발표회. 2000.
  • 6. 최진호* 외 4인. "ANSYS를 이용한 빔창 주위의 열유동해석" .

    ANSYS User's conference

    . 2000.